Responder LE Model 5701 Security and Remote Start Owner's Guide

More documents

Recommendations

Info

Owner recognitionOwner Recognition lets up to four users of the system have uniquesettings that meet their specific needs. It is almost like having fourseparate alarms in your vehicle, one for each user. This feature isonly available to authorized dealers using the Bitwriter or Bitwriter 2program tool.Rapid resume logicThis Directed system will store its current state to non-volatilememory. If power is lost and then reconnected the system will recallthe stored state from memory.For example, if the unit is in Valet Mode and the battery is disconnectedfor any reason, such as servicing the car, when the battery isreconnected the unit will still be in Valet Mode. This applies to allstates of the system including arm, disarm, and Valet Mode.Power saver modeSystemYour system will automatically enter Power Saver Mode while armed orin Valet Mode, after a period of time in which no operation has beenperformed. This lowers the current draw on the vehicle’s battery. PowerSaver Mode takes over under the following conditions:Power Saver when the system is armed: After the system has beenarmed for 24 hours the LED will flash at half its normal rate, decreasingthe system’s current draw.38© 2008 Directed Electronics—all rights reserved
Power Saver in Valet Mode: When the system enters Valet Mode theStatus LED on the Responder LE control center illuminates steadily. Ifthe vehicle is not used (ignition is not turned on) for a one hour periodwhile the system is in Valet Mode, the status LED will shut off. Ifthe system remains in Valet Mode, the LED will come back on the nexttime the ignition is turned on and then back off.2-way remoteYour Responder LE 2way remote control has a feature called remotepower save mode. When programmed ON under remote options, theremote will conserve power by disabling the paging function if unusedfor more than 72 hours. Pressing any button on the remote will restorethe paging function.The default setting is ON. See Remote control programming section ofthis guide or ask your dealer for details on how to program.© 2008 Directed Electronics—all rights reserved 39
Page 1 and 2: Responder LE Model 5701Security and
Page 3 and 4: CABLE FEDERAL LAWS SHALL APPLY AND
Page 5 and 6: Table of contentsLimited lifetime c
Page 7 and 8: What is included■■■■■■
Page 9 and 10: Responder LE 2-Way12A U X3456789Fea
Page 11 and 12: Transmitter configurationLevelButto
Page 13 and 14: Feature Command ConfirmationFeedbac
Page 15 and 16: Feature Command ConfirmationFeedbac
Page 17 and 18: Remote control programmingThe Respo
Page 19: Multi-car control capabilityYou can
Page 22 and 23: What’s NewResponder LE is an adva
Page 24 and 25: The AUX output numbering has change
Page 26 and 27: Use of this product in a manner con
Page 28 and 29: While the system is armed▀ Fail-S
Page 30 and 31: Modified Arming ModesThe Responder
Page 32 and 33: If you hear five chirps on disarmin
Page 34 and 35: the error beep once, and then the R
Page 36 and 37: Timer modeTo activate the runtime o
Page 38 and 39: controls on.To perform Valet take-o
Page 40 and 41: DiagnosticsThe microprocessor at th
Page 42 and 43: Table of zonesA zone is represented
Page 46 and 47: Programming optionsYour system has
Page 48 and 49: Security & convenience expansionsLi
Page 50 and 51: Glossary of Terms2-Way Remote: A ha
Page 53 and 54: ✂Quick Reference GuideCut along d
Page 56: The company behind this system is D

Responder LE Model 5701 Security and Remote Start Owner's Guide

Create successful ePaper yourself

Delete template?

Save as template?