5.4MB - M-System

Linear & Rotary Electronic ActuatorsSERVOTOP TYPE C SeriesLinear Motion TypeLinear Motion TypeRotary Motion TypeRotary Motion TypeAPPLICATIONSCRPPaper millHAVC damper positioningFuel and gas exhaust valve controlsOnboard engine coolant line controlCo-generation plantPaper millAPPLICATIONSPower plantSteel millIncinerator plantFEATURESCSPSuitable for high thrust/long stroke applicationsLightweight and compact designSimple field adjustmentsElectric limiters for full-open/closed positionsISO standard flangeSPECIFICATIONSModelStrokeMaximum thrustInput signalPower inputEnvironmental protectionWiring conduitMotorPosition detectionManual operationPosition outputOperating temperatureMaximum vibrationApprox. weightResolutionCSP40 mm (1.57”), 75 mm (2.95”)12000 N (2697 lbs)4-20 mA or 1-5 V100 Vac, 110 Vac, 200 Vac, 220 VacIP 56G 1” female threadAC motorPotentiometerProvided4-20 mA-10 to +60°C (14 to 140°F)2 G at 50 Hz15 kg (33.1 lbs)Hysteresis 1 mm or lessCo-generation plantFEATURESSuitable for high torque applicationsLightweight and compact designSimple field adjustmentsElectric limiters for full-open/closed positionsISO standard flangeSPECIFICATIONSModelMaximum angleMaximum torqueInput signalPower inputEnvironmental protectionWiring conduitMotorPosition detectionManual operationPosition outputOperating temperatureMaximum vibrationApprox. weightResolutionCRP-068.6 N·m50.6 ft·lbsEngine coolant line controlCRP-145 to 90°196 N·m144.7 ft·lbs434.0 ft·lbs4-20 mA or 1-5 V100 Vac, 110 Vac, 200 Vac, 220 VacIP 55G 1/2” female threadAC motorPotentiometerProvided4-20 mA-5 to +60°C (23 to 140°F)4 kg8.8 lbs2 G8 kg17.6 lbs0.45°CRP-2588 N·m15 kg33.1 lbs6

Two-wire Brushless Position TransmittersVOS2T & VOS2T-RLeverIndicatorDirect drive shaftDiecast aluminum enclosureDirect/Reverse selectorTerminal blockBrushless angle sensorModel VOS2T and VOS2T-R are two-wireposition transmitters incoporating abrushless angle sensor as their key sensingcomponent. They detect rotating angles ofpneumatic and electric actuators and send 4to 20 mAdc signal proportional to the anglesor the sine of rotating angles (stroke).They are also widely used in monitoring andautomating various mechanical systems.FEATURESLightweight & compact designHigh resolutionDirect and reverse actions are selectable in-fieldIP 65 diecast aluminum enclosure is suitable for field applicationsCable glandTYPICAL VALVE APPLICATIONSPosition transmitter for pneumatic control valve or dampersContinuous control of an ON/OFF solenoid valveMORE APPLICATIONSPosition feedback for motor-driven systems or servo control systemsMeasuring roller position displacement in paper, cloth and othertypes of film feedersUpward/downward positioning for boarding bridgesRudder direction sensingLiquid level sensing in reservoir tanksSPECIFICATIONSModelInput angleMechanical angleStopper strengthOutput actionOutput signalLoad resistanceSupply voltageEnvironmental protectionWiring conduitOperating temperatureMaximum vibrationApprox. weightLinearityVOS2TVOS2T-RLinear Motion Type Rotary Motion Type-22.5 to +22.5° -45 to +45°-27 to +27°-55 to +55°1.37 N·m (1.011 ft·lbs) with static loadDirect or Reverse4-20 mAdc0-600 Ω at 24 Vdc supply15-28 VdcIP 65G 1/2” female thread-5 to +60°C (23 to 140°F)2 G550 g (1.2 lbs) without lever or cable1.0% within the input angleDIMENSIONS mm(inch)VOS2T-R95 (3.74) 24 (.91)approx. 102 (4.02)85.5 (3.37)68 (2.68)LEVER SIZE mm (inch)Position Transmitter installed with a damper05 –0.03 dia.18 (.71)90°110°50.5 (1.99) G 1/253(2.09)LEVER TYPEEffective Radius 15 – 40 mm (.59” – 1.57”)Effective Radius 40 – 130 mm (1.57” – 5.12”)Effective Radius 35 – 80 mm (1.38” – 3.15”)45°BAAR12 (.47) – R45 (1.77)R38 (1.50) – R132 (5.20)R30 (1.18)– R82.5 (3.25)B54 (2.13)141 (5.55)91.5 (3.60)7