13.07.2015 Views

Tankless Water Heater - Waiwela

Tankless Water Heater - Waiwela

Tankless Water Heater - Waiwela

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

IMPORTANT SAFETY INFORMATIONREAD ALL INSTRUCTIONS BEFORE USING.Notice:Displayshows°F only.! DANGER!water temperature SettingSafety and energy conservation are factors to be considered when selecting the watertemperature setting of a water heater’s remote control. <strong>Water</strong> temperatures above125°F (52°C) can cause severe burns or death from scalding. Be sure to read and followthe warnings outlined on the label pictured below. °Higher (Hotter)PRIORITY°FPOWERON/OFFLower (Cooler)85 100 102 104 106 108 110 112 114 116 118 120* 125 130 135 140 150 160 170 185 °F2938 39 40 41 42 43 44 46 47 48 49*52 54 57 60 66 71 77 85 °C* Temperatures 85°F(29°C) and above 120°F (49°C)can be achieved with the Main (UMC-117) remotecontrol. See page 34 & 35 for minimum andmaximum temperature adjustment.4Time/Temperature Relationship in Scalds<strong>Water</strong> TemperatureTime To Produce a Serious Burn120°F (49°C) More than 5 minutes125°F (52°C) 1 1 /2 to 2 minutes130°F (54°C) About 30 seconds135°F (57°C) About 10 seconds140°F (60°C) Less than 5 seconds145°F (63°C) Less than 3 seconds150°F (66°C) About 1 1 /2 seconds155°F (68°C) About 1 secondTable courtesy of Shriners Burn InstituteThe chart shown above may be used as a guide indetermining the proper water temperature for your home.! DANGER: Households with small children, disabledor elderly persons may require a 120°F (49°C) or lowertemperature setting to prevent contact with “HOT” water.Maximum water temperature occurs while burner is on.To find water temperature being delivered, turn on a hotwater faucet and place a thermometer in the water streamand read the thermometer. (See page 26 & 27 for moredetails.)The temperature of the water at the outlet of the waterheater can be regulated by setting the temperature onRemote Control. The remote control was set at 100°F(38°C) before it was shipped from the factory.The diagram to the bottom left illustrates the RemoteControl and how to adjust the water temperature.Notice: The factory setting allows operating temperaturesbetween 100°F (38°C) and 120°F (49°C). Temperaturesof 85°F (29°C) and above 120°F (49°C) can be achievedwith the MAIN (UMC-117) remote control. Temperaturesof 85°F (29°C) can be achieved with the Bath (USC-117or USC2-117) remote control. Only qualified servicepersonnel should perform this adjustment. Only factoryauthorized remote control(s) should be used.Notice: When this water heater is supplying generalpurpose hot water requirements for use by individuals,a thermostatically controlled mixing valve for reducingpoint of use water temperature is recommended to reducethe risk of scald injury. Contact a licensed plumber or thelocal plumbing authority for further information.Notice: Only commercial products can achievetemperatures up to 185° (85° C).AP14558-1 (09_08) DV 66 Manual.indd 49/17/2008 3:07:52 PM

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!