FAG tools for mechanical mounting and dismounting of rolling ...

CORPORACION BASCO SACAv. Argentina 1165 - LimaTelef.: 433-6633 / 433-6834 - Fax: 431-3188E-mail: ventas@basco.com.peFAG tools for mounting and dismounting of rolling bearingsDouble hook wrenches for tapered bearing seatsFAG double hook wrenchesfor tapered bearing seatsFAG double hook wrenches areintended for the mounting ofself-aligning ball bearings with atapered bore. They are available askits, sets or individual wrenches(for a description see below).FAG double hook wrench kitsLOCKNUT-DOUBLEHOOK-KM..-KITFAG double hook wrench kitscomprise a case containing onedouble hook wrench, one torquewrench and a user manual. Thetorque wrench allows a preciselydefined tightening torque to beachieved at the start of themounting operation.Double hook wrench kits, e. g. LOCKNUT-DOUBLEHOOK-KM5-KIT andLOCKNUT-DOUBLEHOOK-KM13-KITFAG double hook wrench setsLOCKNUT-DOUBLEHOOK-KM..-SETFAG offers two different doublehook wrench sets. The smaller setcontains four double hook wrenches,while the larger set contains five.The other items in the case are thesame as in the kits.Double hook wrench sets LOCKNUT-DOUBLEHOOK-KM5-8-SET andLOCKNUT-DOUBLEHOOK-KM9-13-SETFAG double hook wrenchesLOCKNUT-DOUBLEHOOK-KM…Individual double hook wrenchesare also available, see table onpage 14 below. Each double hookwrench is engraved with the torsionangles for the self-aligning ballbearings to be mounted using thatparticular wrench, so that thedisplacement and reduction inradial internal clearance can beprecisely set.Double hook wrenches, e. g. LOCKNUT-DOUBLEHOOK-KM5 andLOCKNUT-DOUBLEHOOK-KM1313