FAG tools for mechanical mounting and dismounting of rolling ...
FAG tools for mechanical mounting and dismounting of rolling ...
FAG tools for mechanical mounting and dismounting of rolling ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CORPORACION BASCO SACAv. Argentina 1165 - LimaTelef.: 433-6633 / 433-6834 - Fax: 431-3188E-mail: ventas@basco.com.pe<strong>FAG</strong> <strong>tools</strong> <strong>for</strong> dis<strong>mounting</strong> <strong>of</strong> <strong>rolling</strong> bearingsThree-section extraction plates <strong>for</strong> extractorsThree-section<strong>FAG</strong> extraction platesApplication• For extraction <strong>of</strong> complete bearingsor tightly fitted inner rings.• Principally <strong>for</strong> cases in which theinner ring is adjacent to a shoulderon the shaft without extractionslots. Good radial access to thebearing location is required.• Extraction <strong>of</strong> inner rings <strong>and</strong>complete <strong>rolling</strong> bearings withoutdamage is possible with properh<strong>and</strong>ling.FunctionThe three extraction plates arepushed, by means <strong>of</strong> alternatelyscrewing in the nuts, between theshaft shoulder <strong>and</strong> inner ring. Theseparating device is screwed ontothe extraction plates using three tierods.If the extraction <strong>for</strong>ces are directed through the <strong>rolling</strong> elements, the<strong>rolling</strong> elements <strong>and</strong> raceways could be damaged.Use <strong>of</strong> a three-section extraction plate prevents damage because the<strong>for</strong>ces act on the tightly fitted inner rings.30
Change language