FAG tools for mechanical mounting and dismounting of rolling ...

More documents

Recommendations

Info

CORPORACION BASCO SACAv. Argentina 1165 - LimaTelef.: 433-6633 / 433-6834 - Fax: 431-3188E-mail: ventas@basco.com.peFAG tools for dismounting of rolling bearingsMechanical internal extractors 62 for small bearingsFAG internal extractors 62Application• For deep groove ball bearings andangular contact ball bearings.The internal extractor set comprisesnine extractors and can be usedon bearings with a bore diameterfrom 5 mm to approx. 70 mm.• For tightly fitted outer rings.• The inner ring bore must be easilyaccessible.• Since the extraction force isdirected through the rollingelements, the possibility ofbearing damage cannot beexcluded.Operation and handlingThe gripper segments spread outwhen the threaded spindle istightened. The lip of the jaws ispressed against the back of thebearing inner ring bore. The bearingis extracted using the threadedspindle and the internal extractorwith the aid of the countersupport.Ordering designation:PULLER62-SET (nine internalextractors with two countersupportsin a rigid metal case). The nine internalextractors with countersupportcan also be ordered individually.Product range - internal extractor set 62 with countersupportsOrdering designation For inside diameter Depth Spindle Mass9 internal extractors Internal extractorthread Wwith 2 countersupports with countersupport from to(set complete in case)mm mm kgPULLER62-SET PULLER62-100-005 5 6,5 35 M10 0,09PULLER62-100-007 7 9,5 35 M10 0,09PULLER62-100-010 10 13,5 35 M10 0,1PULLER62-100-014 14 19,5 45 M10 0,13PULLER62-100-020 20 29,5 50 M10 0,18PULLER62-100-030 30 39,5 90 M10 0,25PULLER62-200-040 40 49,5 95 M14~1,5 0,48PULLER62-200-050 50 59,5 95 M14~1,5 0,56PULLER62-200-060 60 69,5 95 M14~1,5 0,6219
CORPORACION BASCO SACAv. Argentina 1165 - LimaTelef.: 433-6633 / 433-6834 - Fax: 431-3188E-mail: ventas@basco.com.peFAG tools for dismounting of rolling bearingsMechanical internal extractors PULLER-INTERNAL10/100-SETFAG internal extractorsPULLER-INTERNAL10/100-SETApplication• For standard deep groove ballbearings. The set, comprising6 sets of extraction legs and2 threaded spindles can be usedon bores from 10 to 100 mm.• For tightly fitted outer rings.• No dismounting of shaft.FunctionThree extraction legs grip under theouter ring shoulder of the deepgroove ball bearing. The suitablecombination of extraction legs andthreaded spindle for the bearing sizecan be found in the selection table.Ordering designation:PULLER-INTERNAL10/100-SET(6 sets of extraction legs and2 threaded spindles in a practicalcase, case dimensions:315~250~70 mm, total mass: 3,2 kg)The individual parts can be orderedseparately, see page 21 below.20
Page 8 and 9: CORPORACION BASCO SACAv. Argentina
Page 10: CORPORACION BASCO SACAv. Argentina
Page 19: CORPORACION BASCO SACAv. Argentina

FAG tools for mechanical mounting and dismounting of rolling ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?