FAG tools for mechanical mounting and dismounting of rolling ...

CORPORACION BASCO SACAv. Argentina 1165 - LimaTelef.: 433-6633 / 433-6834 - Fax: 431-3188E-mail: ventas@basco.com.peFAG tools for dismounting of rolling bearingsMechanical ball bearing extractors 56FAG ball bearingextractors 56Application• For extracting complete deepgroove ball bearings.• For tightly fitted outer rings.• For bearings without radial access.• Given the fact that the extractionhooks are applied at the outerring and the threaded spindle isapplied at the shaft, the extractionforce is forced through the rollingelements, which can render thebearing unusable.22Operation and handlingThe claws of the device grasp theraceway edge of the outer ringbetween the balls and are supportedby the inner ring. The bearing isextracted using a threaded spindle.Depending on the bearing size, oneof three extractor sizes and one of13 sets of claws is selected, seetable on page 9. The number ofarms required and their arrangementin the index plate depends on thenumber of balls in the bearing.Complete extractor sets consist ofone extractor and three or five setsof claws as well as a wrench with aT-shaped handle in the box, seetable below.Product range - ball bearing extractors 56Ordering designation Depth With claws Wrench with Spindle MassBall bearingno.T-shapedthread Wextractor sethandlemmkgPULLER56-020-SET 65 01, 02, 03 A/F14 M10 2,1PULLER56-120-SET 90 1, 2, 3, 4, 5 A/F22 M20~2 3,45PULLER56-220-SET 150 7, 11, 16, 17, 23 A/F22 M20~2 4,15