Toshiba T6963C GLCD datasheet - Roman Black
Toshiba T6963C GLCD datasheet - Roman Black
Toshiba T6963C GLCD datasheet - Roman Black
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>T6963C</strong>● Screen CopyCode Hex. Function Operand11101000 E8H Screen Copy ―This command copies a single raster line of data to the graphic area.The start point must be set using the Set Address Pointer command.Note 1: If the attribute function is being used, this command is not available.(With Attribute data is graphic area data.)Note 2: With Dual−Scan, this command cannot be used (because the <strong>T6963C</strong> cannot separate the upper screendata and lower screen data).Refer to the following flowchart.Note: This command is available when hardware column number and software column number are the same.Hardware column number is related to MD2 and MD3 setting.Software column number is related to Set Text Area and Set Graphic Area command.2001-02-28 24/46
Change language