FD-5 - Tams

More documents

Recommendations

Info

English<strong>FD</strong>-5How to use this manualIf you have no specialist technical training, this manual gives step-bystepinstructions for safe and correct fitting of the module, andoperation. Before you start, we advise you to read the whole manual,particularly the chapter on safety instructions and the FAQ chapter. Youwill then know where to take care and how to prevent mistakes whichtake a lot of effort to correct.Keep this manual safely so that you can solve problems in the future. If youpass the module on to another person, please pass on the manual with it.Intended use! Caution:Integrated circuits are very sensitive to static electricity. Do not touchcomponents without first discharging yourself. Touching a radiator orother grounded metal part will discharge you.The module can be used according to the specifications of this manual.It is designed for a mounting in a model railway locomotive or in amodel railway carriage. It evaluates the DCC format data sent by thedigital control unit to its address. The decoder has 7 outputs for theconnection of optional accessories.The module is not suitable for children under the age of 14.Reading, understanding and following the instructions in this manualare mandatory for the user. Any other use of the module isinappropriate and invalidates any guarantees.Page 18
<strong>FD</strong>-5EnglishSafety instructionsMechanical hazardsCut wires can have sharp ends and can cause serious injuries. Watchout for sharp edges when you pick up the PCB.Visibly damaged parts can cause unpredictable danger. Do not usedamaged parts: recycle and replace them with new ones.Electrical hazards• Touching powered, live components,• touching conducting components which are live due to malfunction,• short circuits,• connecting the circuit to a higher voltage than designed,• impermissibly high humidity,• condensation of watercan cause serious injury due to electrical shock. Take the followingprecautions to prevent this danger:• Never perform wiring on a powered module.• Only use low power for this module as described in this manual andonly use certified transformers.• Connect transformers and soldering stations only in approved mainssockets installed by an authorised electrician.• Observe cable diameter requirements.• After the condensation of water do not start working until after aminimum of 2 hours of acclimatisation.• Mounting the module should only be done in closed, clean, dryrooms. Beware of humidity.• Use only original spare parts if you have to repair the module.Page 19
Page 1 and 2: •FD-4 • •FunktionsdecoderMoto
Page 3: FD-5EnglishTable of contentsHow to
Page 7 and 8: FD-5EnglishEMC declarationThis prod
Page 9 and 10: FD-5EnglishFunction F2The function
Page 11 and 12: FD-5EnglishSafe and correct solderi
Page 13 and 14: FD-5English! Caution:The return con
Page 15 and 16: FD-5EnglishFAQ• Parts are getting
Page 17 and 18: FD-5FD-5Anschlußplan - Connections
Page 19: •••Aktuelle Informationen und

FD-5 - Tams

Create successful ePaper yourself

Delete template?

Save as template?