4-3 REMOVAL AND INSPECTION OF ... - Mojo Motorcycles

Rear wheel:Watch: Please place main stand to park the motorcycle for maintenance.Removal:◎ Remove 2 bolts on the caliper.◎ Caliper.◎ Remove the nut.◎ Rear wheel.Note:(1) Please use vacuum to clean wheel rim and lining.Try to reduce the contamination of asbestos fiber, whichmay affect the human breath system or lead to cancer.Speed meter cable(2) The transverse eccentricity should be within 3.0mm.If the condition is poor, please replace with new one.(3) The lateral eccentricity should be within 3.0 mm.If the condition is poor, please replace with new one.Installation:Install in reverse order of removal procedures.Shock absorber:Front:Watch: Please place main stand to park themotorcycle for maintenance.Removal:◎ Remove upper and lower attaching boltson front shock absorber.(each side 2 bolts)◎ Shock absorber.Inspection: Check if the shock absorber is worn,scratched, leaking, or bent. If its condition is poor,please replace with new one.Note: Torque of shock absorber upper and lowerattaching bolts: 200 ~ 300 kg-cm.Rear:◎ Remove 2 attaching bolts on air filter.◎ Air filter.◎ Remove upper and lower attaching boltson rear shock absorber.(each side 2 bolts)◎ Shock absorber.212PDF created with pdfFactory Pro trial version www.pdffactory.com