ABB industrial drives ACS880, single drives 0.55 ... - VAE ProSys sro

Standard interface and extensions for comprehensive connectivityThe ACS880 single drives offers a wide range of standardinterfaces. In addition the drive has three option slots that canbe used for extensions including fieldbus adapter modules,input/output extension modules, feedback modules and asafety functions module.Controlconnections2 analoginputs (XAI)2 analogoutputs (XAO)6 digitalinputs (XDI)Digital inputinterlock (DIIL)2 digitalinputs/outputs(XDIO)3 relay outputs(XRO1, XRO2,XRO3)Safe torque off(XSTO)Drive-to-drivelink (XD2D)Built-inModbusAssistantcontrol panel/PC toolconnectionDescriptionCurrent input: –20 to 20 mA,R in: 100 ohmVoltage input: –10 to 10 V,R in> 200 kohmResolution: 11 bit + sign bit0 to 20 mA, R load< 500 ohmFrequency range: 0 to 300 HzResolution: 11 bit + sign bitInput type: NPN/PNP (DI1 to DI5), NPN (DI6)DI6 (XDI:6) can alternatively be used as aninput for a PTC thermistor.Input type: NPN/PNPAs input:24 V logic levels:“0” < 5 V, “1” > 15 VR in: 2.0 kohmFiltering: 0.25 msAs output:Total output current from 24 V DC is limited to200 mACan be set as pulse train input and output250 V AC/30 V DC, 2 AFor the drive to start, both connections mustbe closedPhysical layer: EIA-485EIA-485Connector: RJ-45Control unit ZCUExample of a typical single drives input/output connectiondiagram. Variations maybe possible (please see HW manualfor more information).FaultXPOW External power input1 +24VI24 V DC, 2 A2 GNDXAI Reference voltage and analog inputs1 +VREF 10 V DC, R L 1 to 10 kohm2 -VREF -10 V DC, R L 1 to 10 kohm3 AGND Ground4 AI1+ Speed reference5 AI1- 0(2) to 10 V, R in> 200 kohm6 AI2+ By default not in use.7 AI2- 0(4) to 20 mA, R in> 100 ohmJ1 J1 AI1 current/voltage selection jumperJ2 J2 AI2 current/voltage selection jumperXAO Analog outputs1 AO1Motor speed rpm 0 to 20 mA, R L< 500 ohm2 AGND3 AO2Motor current 0 to 20 mA, R L< 500 ohm4 AGNDXD2D Drive-to-drive link1 B2 A Drive-to-drive link or built-in Modbus3 BGNDJ3 J3 Drive-to-drive link termination switchXRO1, XRO2, XRO3 Relay outputs11 NC Ready12 COM250 V AC/30 V DC13 NO2 A21 NC Running22 COM250 V AC/30 V DC23 NO2 A31 NC Faulted (-1)32 COM250 V AC/30 V DC33 NO2 AXD24 Digital interlock1 DIIL Digital interlock2 +24VD +24 V DC 200 mA3 DICOM Digital input ground4 +24VD +24 V DC 200 mA5 DIOGND Digital input/output groundJ6 Ground selection switchXDIO Digital input/outputs1 DIO1 Output: Ready2 DIO2 Output: RunningXDI Digital inputs1 DI1 Stop (0)/Start (1)2 DI2 Forward (0)/Reverse (1)3 DI3 Reset4 DI4 Acceleration and deceleration select5 DI5 Constant speed 1 (1=On)6 DI6 By default not in useXSTO Safe torque off1 OUT12 SGND Safe torque off. Both circuits must be closed3 IN1 for the drive to start.4 IN2X12 Safety functions module connectionX13 Control panel connectionX205 Memory unit connectionCatalog | ABB industrial drives ACS880 single drives 17