BRAKES & CLUTCHES

Brakes & Clutches
Power-On Applications
Deltran PT
The CS, CF & BL Series are Power-On Clutches.
Paper Feed
Power-On Clutch Application:
CS, CF and BL products are used on paper feed applications. There is a prime
motor that drives a series of belts/pulleys that drive feed rollers. The CS, CF or
BL are mounted on the feed roller shaft. When power is applied to the CS, CF
or BL, the clutch engages and then drives the feed roller. The clutch will continue
to drive until power is removed.
Advantages
Product Selection
Low inertia and minimal drag
CS
Fast response, repeatable performance
CF
Energy efficient
BL
Simple installation
Non-asbestos friction material
Conveyor Drive System
Power-On Clutch and Brake Application:
CS, CF power-on clutches are used to drive the conveyor belt.
The BF power-on brake is used to stop the conveyor belt.
Advantages
Fast response, repeatable performance
Static or dynamic engagement
Simple installation
Energy efficient
Econonic cost
Non-asbestos friction material
Product Selection
CS
CF
BF
Power Sliding Door
Power-On Tooth Clutch Application:
TC is a power-on tooth clutch used to drive a
mechanical drive assembly in either direction
Advantages
Simple installation
Energy efficient
Torque to size ratio
Positive engagement, indexing
capability
Product Selection
TC
CS
CF
Friction Applications
DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and
disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.
Tel : 540 633 3400 Web site : www.DanaherMotion.com 13
FRICTION