Product Selection 4 Tel : 540 633 3400 Web site : www.DanaherMotion.com Deltran PT <strong>BRAKES</strong> & <strong>CLUTCHES</strong> SELECTION CHART—BY FUNCTION Brakes & Clutches Function Type Models/Sizes Max Torque Bore Range Max RPM Actuation Page lb-in (Nm) Method Starting Wrap Spring DL-30, 33 30 (3.4) English: 1/4 - 5/16" 1200 DC 70 Clutch Metric: 6-8 mm Wrap Spring MAC-30, 45, 45 w/BC 150 (16) English: 1/4 - 5/8" 1200 DC 73 Clutch Metric: 6-16 mm Function icons are shown at the top of each product page to make selecting easier. Wrap Spring BBC-29 25 (2.83) English: 1/4 ” 1800 DC 77 Clutch Metric: 6 mm Friction CS-11, 15, 17, 22, 26, 30 125 (14.2) English: 1/4 - 1” 5000 DC 100 Clutch CSC-11, 15, 17, 22, 26, 30 Metric: 8-35 mm Friction CF-11, 15, 17, 22, 26, 30 125 (14.2) English: 1/4 - 5/8" 5000 DC 100 Clutch CFC-11, 15, 17, 22, 26, 30 Metric: 8-16 mm Friction BL-2.5, BL-3.0 4.4 (.5) English: 1/4 - 5/16" Clutch 5000 DC 124 Friction TC-19, 30, TCR-19, 30 425 (48.0) English: 3/8 - 1/2" 5000 DC 126 Clutch TCP-19 50 (5.6) Friction Clutch MDC Custom Engineered Product - Consult Factory 129 Indexing Wrap Spring PSI-2, 4, 5, 6, 8 2500 (282.5) English: 1/4 - 11/2" 1800 Mechanical 60 Clutch Metric: 6-40 mm Wrap Spring SAC-2, 4, 5, 6 500 (56.5) English: 1/4 - 1" 1800 AC or DC 46 Clutch Metric: 6-25 mm Solenoid; AIR Wrap Spring Super CB 5,000 (565) English: 1/2 - 13/4” 750 AC or DC 18 Clutch/Brake CB-5, 6, 7, 8, 10 Metric: 12-45 mm Solenoid; AIR Wrap Spring Standard CB 5,000 (565) English: 1/4 - 13/4” 1800 AC or DC 30 Clutch/Brake CB-2, 4, 5, 6, 7, 8, 10 Metric: 6-45 mm Solenoid; AIR Wrap Spring ACCE-7 1500 (169.5) English: 1 - 17/16" 400 AC or DC 54 Clutch Solenoid; AIR Wrap Spring ACCE-7 2500 (282.5) English: 1 - 17/16" 400 AC or DC 54 Clutch Heavy Duty Solenoid; AIR Wrap Spring ACCM-7 1500 (169.5) English: 1 - 17/16" Clutch 400 Mechanical 57 Wrap Spring ACCM-7 2500 (282.5) English: 1 - 17/16" 400 Mechanical 57 Clutch Heavy Duty Wrap Spring SP-2, 4, 5, 6 500 (56.5) English: 3/4 - 1” 1500 AC or DC; AIR 78 Clutch Metric: 20-25 mm Wrap Spring BIMAC 75 (8.475) English: 1/4 - 3/8" 1500 AC or DC 80 Clutch B-1, B-2 Solenoid Slipping Wrap Spring BDSC 9 (1.059) English: 1/4 - 5/8" 200 N/A 82 Clutch Sizes 2, 4 Metric: 6-16 mm Wrap Spring CTS-25, 50 28 (3.164) English: 1/4 - 5/16" Clutch 150 N/A 83 Holding Wrap Spring BDNB 250 (28.23) English: 1/2" Brake 200 N/A 81 Friction Brake BF-11, 15, 17, 22, 26, 30 125 (14.13) English: 3/16 -1” Metric: 3-35 mm 5000 DC 110 Friction Brake BPM Custom Engineered Product - Consult Factory 129 Friction Brake BRP-15, 17, 19, 23, 26, 28, 1000 (113.0) English: 1/4 -2” 5000 DC 110 30, 40, 50,70 Metric: 3-45 mm Friction Brake MDB Custom Engineered Product - Consult Factory 129 Friction Brake SB-15, 17, 19, 23, 26, 28, 1200 (135.6) English: 1/4 -2” 5000 DC 110 30, 40, 50,70 Metric: 3-45 mm Friction Brake FSB-15, 17 3 (.34) English: 3/16 -3/8” Metric: 3-8 mm 5000 DC 110 DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.
Brakes & Clutches Deltran PT <strong>BRAKES</strong> & <strong>CLUTCHES</strong> SELECTION CHART—BY CAPABILITY This chart contains basic information to determine when to use a Wrap Spring or Friction product.* Capability The Genuine Wrap Spring Friction Torque Capacity Per Unit Size � Low Power Consumption � Single Revolution � Random Start/Stop � Brake: Power-On � Brake: Power-Off � Soft Start/Soft Stop � Positive Engagement � Stopping Accuracy � Speeds Up To 1750 � � Speeds Over 1750 � Bi-Directional Rotation � Rapid Cycling � � Actuation - Electric � � Actuation - Pneumatic � Actuation - Mechanical � *Many applications require additional specifications not shown in the chart above. Always review your application requirements before choosing a brake or clutch product. Product Selection DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion. Tel : 540 633 3400 Web site : www.DanaherMotion.com 5