BRAKES & CLUTCHES
BRAKES & CLUTCHES
BRAKES & CLUTCHES
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DL-33 Clutch<br />
72<br />
Dimensions (mm)<br />
+ 3.81<br />
27.94<br />
- 1.27<br />
+ .15<br />
1.10<br />
- .05<br />
5.33±0.08<br />
3X<br />
.210±.003<br />
Tel<br />
7.87<br />
.31<br />
3X 120°<br />
[0.13].005 M<br />
HI-CW/SI-CCW<br />
1.<br />
HI-CCW/SI-CW<br />
[33.32±0.25]<br />
∅1.312±.010<br />
A M<br />
For more information see page 87.<br />
PERFORMANCE<br />
18.72<br />
∅ .737 MAX<br />
26.67<br />
1.05<br />
∅<br />
19.18±0.25<br />
.755±.010<br />
4<br />
.157 MIN<br />
∅ "B"<br />
0.33±0.33<br />
.013±.013<br />
Static torque 30 lb-in (3.4 Nm)<br />
Inertia, rotating parts .016 lb-in 2<br />
Maximum operating speed 1200 RPM<br />
Temperature 32°-140° F (0-60° C)<br />
Cycle Life 1 x 10 6 @ 30 lb-in Total Load<br />
Weight .22 lbs.<br />
BORE DATA<br />
Bore Sizes Bore B Ø<br />
.2505-.2530<br />
1/4 inch (6.362-6.427)<br />
.3130-.3181<br />
5/16 inch (7.950-8.090)<br />
METRIC BORES<br />
.237-.239<br />
6 mm (6.01-6.09)<br />
.315-.318<br />
8 mm (8.01-8.09)<br />
Cross Pin or Standard "D" Bores available, consult factory.<br />
26.80±0.25<br />
1.055±.010<br />
24±0.25<br />
.945±.010<br />
6.91±0.25<br />
.272±.010<br />
2.44±0.25<br />
.096±.010<br />
12.99±0.038<br />
.5115±.0015<br />
: 540 633 3400 Web site : www.DanaherMotion.com<br />
Deltran PT<br />
Brakes & Clutches<br />
DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and<br />
disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.<br />
∅<br />
2.62±0.08<br />
2X .103±.003<br />
RAD. FULL<br />
[0.01].004 M A M<br />
NOTES:<br />
1.<br />
FLYING LEADS<br />
24 AWG<br />
12" LENGTH<br />
INPUT AND ROTATION (VIEWED THIS END):<br />
HUB INPUT-CW/SHAFT INPUT-CCW OR<br />
HUB INPUT-CCW/SHAFT INPUT-CW<br />
RECOMMENDED MATING CONNECTORS:<br />
TERMINAL - POLARIZED LATCHING<br />
CRIMP ON CONTACTS<br />
HOUSING: AMP NO 104257-1<br />
CONTACTS:<br />
LOOSE: AMP NO 1-530151-0<br />
STRIP: AMP NO 530151-9<br />
ALTERNATE TERMINAL-<br />
INSUL. DISPLACEMENT CONTACTS<br />
ASSEMBLY - AMP NO 103956-1<br />
ASSEMBLY - MOLEX NO 70400-0141<br />
ELECTRICAL DATA<br />
Current Resistance<br />
Voltage* amps ohms +/- 10% Status<br />
24 DC 185.0 Standard<br />
12 DC 45.0 Standard<br />
90 DC 2670.0 Standard<br />
*Custom voltages available<br />
(Coils are rated for continuous duty; 3.5 watts nominal)<br />
Molded connector or 12" flying leads
Change language