BRAKES & CLUTCHES

Super CB Series Clutch/Brake Packages
18
Longer Life, Extra Performance,
Solenoid Operated Units - Super CB Series
Super CB Series combination clutches and
brakes accurately start and stop loads driven
by a continuously rotating power source. CB
units operate from a single AC or DC pulse,
stopping the load within ±½° noncumulative
at speeds up to 750 RPM, depending on
size. Each unit is pre-engineered and preassembled
for easy installation.
Super CB clutches and brakes provide 3 to 5
times longer life! The five sizes of Super CB
clutch/brake packages offer extraordinary
performance and durability for those applications
requiring long life under high load,
high duty cycle conditions. Danaher Motion
will retrofit standard CB-5, CB-6, CB-7, CB-8,
CB-10.
Features
Available in 5 sizes
Cost-effective design
3–5 times longer life than Standard CB
Split cam design sizes CB-5, CB-6, CB-7,
CB-8
Adjustable control collars for easy and
accurate output stop position setting
Load over-travel or back-up is eliminated
since Super CB units lock the load in both
directions when the solenoid is off
How to order
Tel
Anti-overrun feature prevents the output
from running faster than the input
Roller bearings never need
adjustment for wear
Bring loads up to speed in 3
milliseconds and stop within 1.5
milliseconds
Easy interface to PCs and other controls
including Deltran PT
Photoscanner photoelectrics
AC or DC operated—other voltages
available
See pages 68 and 69 for controls,
power supplies
Direct retrofit for Standard CB-5,
CB-6, CB-7, CB-8, CB-10
1-, 2- or 4-stop collar with steel insert
standard
Reinforced plastic stop collars also
available for up to 24 stop maximum
Heavy-duty industrial grade coils
High cycle rate capability
High torque to size ratio
Repeatable positioning within ±½°
: 540 633 3400 Web site : www.DanaherMotion.com
Deltran PT
Super CB - 6 , CW , 24V , 3/4" bore , 2
Super CB Series
Specify:
Imperial or Metric
OPTIONS
Dust Covers See page 66
Stop Collars See page 67
Pneumatic Actuators See page 68
Size
CB-5 = 5
CB-6 = 6
CB-7 = 7
CB-8 = 8
CB-10 = 10
Coil Voltage
12V = 12VDC
24V = 24VDC
90V = 90VDC
115 = 115VAC
Direction of Rotation
CW = Clockwise
CCW = Counterclockwise
Typical Applications
Riveters
Punch presses
Packaging equipment
Conveyor drives
Heavy duty machinery
Rapid cycling equipment
Bore Size
CB-5 = ½"
CB-6 = ¾", 1"
CB-7 = 1", 1¼",1½"
*¾"
CB-8 = 1¼", 1½"
*1",*1 3/8"
CB-10 = 1½"
*1 5/8",*1¾"
*Special order
Brakes & Clutches
Stop Collar
1 = 1 stop
2 = 2 stop
4 = 4 stop
Other stop collars
are special order.
DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and
disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.