XRAY T2R PRO Instruction Manual

2. FRONT & REAR SUSPENSION303129SHIM 3x6x1L=RIt is extremely important that the arms move freelyon the pivot pins. If they do not, use the #107633HUDY Arm Reamer to slightly resize the holes inthe arms.THIN COMPOSITE SHIM3x7x2mmDETAIL303129SHIM 3x6x23x16mm309319SHIM 3x7x2THICK COMPOSITE SHIM3x6x2mmTHIN COMPOSITE SHIM3x6x1mmREAR LEFT ARM902314SH M3x14DETAIL3x14mmUse these suspension holders forinitial assembly902316SH M3x1650.5 mmTOE-IN ADJUSTMENTTRACK WIDTH ADJUSTMENTWHEELBASE ADJUSTMENTROLL CENTER ADJUSTMENTSQUAT ADJUSTMENT2x 1:1Roll Center Position:-0.75mmRoll Center Position:0mmRoll Center Position:+0.75mmFRONT LEFT ARM303129SHIM 3x6x1L=RDETAILDETAIL309319SHIM 3x7x10mmASPHALT+0.75mmCARPETTHIN COMPOSITE SHIM3x7x1mmIt is extremely important thatthe arms move freely on thepivot pins. If they do not, usethe #107633 HUDY ArmReamer to slightly resize theholes in the arms.902316SH M3x163x16mmTHIN COMPOSITE SHIM3x6x1mmTHIN COMPOSITE SHIM3x6x1mmUse these suspension holders forASPHALT initial assemblyFRONT RIGHT ARMUse these suspension holders forCARPET initial assembly3x16mmDETAILTHIN COMPOSITE SHIM3x7x1mmDETAIL+0.75mmCARPET0mmASPHALT47.5 mmTRACK WIDTH ADJUSTMENTWHEELBASE ADJUSTMENTROLL CENTER ADJUSTMENTDIVE ADJUSTMENTRoll Center Position:-0.75mmRoll Center Position:0mmRoll Center Position:+0.75mm2xL=R10