XRAY T2R PRO Instruction Manual

More documents

Recommendations

Info

8. FINAL ASSEMBLYBATTERY ASSEMBLY CONFIGURATION5-CELL REAR POSITION ALTERNATIVE5-CELL FRONT POSITION ALTERNATIVE4xWHEELS & TIRES & INSERTS(NOT INCLUDED)CAWARNING!Follow the adhesive manufacturer's instructionsfor proper use and safety. Wear proper eye andhand protection.FOAM TIRE TIPSUS Foam-Spec Notice:Some foam wheels may be slightly wider and may touch the front steering blocks. Toavoid this, we recommend grinding the inside edge of the wheel, using a tire truerand a file. Make sure that both front tires/wheels end up being the same width, andthat there are no rough edges.Also, make sure that the front wheels and tires do not touch the steering blocks whenthe steering is turned, and that the wheels and tires do not touch the shocks.We recommend using #107870HUDY Fibre Reinforced Tape5-CELL OR 6-CELL INLINE BATTERY PACK(NOT INCLUDED)960140N M4or the optional battery holders:#306163 XRAY Graphite Battery Holder (for 6-cell chassis)DETAILFIBRE TAPE(HUDY #107870)(NOT INCLUDED)RIDE HEIGHT ADJUSTMENTDROOP ADJUSTMENTMake sure the wheel nuts are very tight, so thewheels do not loosen during racing.28
LIPO CONVERSION SETBecause of enormous increase in Lipo batteries popularity, XRAY is the first car which is introducing Lipo conversion set. Thanks to the conversion, carscan be powered by the most used and popular Lipo batteries.3x6(from kit)Do not use the standard reartop deck from the kit.3x8301183(from kit)3011863x8NOTE! The LiPo Conversion Setallows for the fitting of popularLiPo battery packs with a height of24.5mm or less (the most popularand common configuration andsizing available on the marketat the time of development).However, because of continuingdevelopment of LiPo batteries andno set of standardized regulationsabout battery sizes, XRAY cannotguarantee that all LiPo batterypacks will fit in the cars using thisconversion set.301186BAG08LiPo Battery Fitting Because LiPo batteries are also different in the width, it is important to correct the length of ESC wiring so that the batteryconnectors can easily be connected to the batteries. If the battery connectors cannot be connected because the top deck is in the way, please follow themodification shown in the pictures.CUTSOLDERFibre Tape(HUDY #107870)Pinion AssemblyBecause of the LiPo battery width, it is important to check that the motor pinion is not touching the battery. If the piniontouches the battery (or is close to touching it), move the pinion closer to the motor. It is sufficient to have only half of the pinion teeth contacting the spurgear teeth. This has no effect on the car’s speed or performance.min. 1mmLiPo batteryPinionDETAIL29
Page 5 and 6: 0. KIT (FACTORY PRE-ASSEMBLED)At th
Page 7 and 8: COMPOSITE BALL DIFF. & FRONT SOLID
Page 9 and 10: 2. FRONT & REAR SUSPENSION903306SFH
Page 11 and 12: 3. CENTRAL TRANSMISSION902306303046
Page 13 and 14: 3. CENTRAL TRANSMISSION902306SH M3x
Page 15 and 16: 4. STEERING307455PB 5mmSERVO LINKF
Page 17 and 18: 5. FRONT & REAR TRANSMISSION2xOILBE
Page 19 and 20: 5. FRONT & REAR TRANSMISSION309319S
Page 21 and 22: 6. SHOCK ABSORBERSSHOCK OILCUTAWAY
Page 23 and 24: 7. FRONT & REAR ASSEMBLY90330830121
Page 25 and 26: 7. FRONT & REAR ASSEMBLY30133290230
Page 27: 8. FINAL ASSEMBLY902306SH M3x6When
Page 31: 1RACETRACKNAMECITY /COUNTRYCONTACTD

XRAY T2R PRO Instruction Manual

Create successful ePaper yourself

Delete template?

Save as template?