XRAY T2R PRO Instruction Manual

LIPO CONVERSION SETBecause of enormous increase in Lipo batteries popularity, XRAY is the first car which is introducing Lipo conversion set. Thanks to the conversion, carscan be powered by the most used and popular Lipo batteries.3x6(from kit)Do not use the standard reartop deck from the kit.3x8301183(from kit)3011863x8NOTE! The LiPo Conversion Setallows for the fitting of popularLiPo battery packs with a height of24.5mm or less (the most popularand common configuration andsizing available on the marketat the time of development).However, because of continuingdevelopment of LiPo batteries andno set of standardized regulationsabout battery sizes, XRAY cannotguarantee that all LiPo batterypacks will fit in the cars using thisconversion set.301186BAG08LiPo Battery Fitting Because LiPo batteries are also different in the width, it is important to correct the length of ESC wiring so that the batteryconnectors can easily be connected to the batteries. If the battery connectors cannot be connected because the top deck is in the way, please follow themodification shown in the pictures.CUTSOLDERFibre Tape(HUDY #107870)Pinion AssemblyBecause of the LiPo battery width, it is important to check that the motor pinion is not touching the battery. If the piniontouches the battery (or is close to touching it), move the pinion closer to the motor. It is sufficient to have only half of the pinion teeth contacting the spurgear teeth. This has no effect on the car’s speed or performance.min. 1mmLiPo batteryPinionDETAIL29