1 - Multiprox

and otheres:www.comat.chVUndervoltage MonitorMV52 (50Hz)MV62 (60Hz)LN11 14al ok12 12A2 A1Zu schützende AnlageteileInstallation à protégerInstallation to be protected13 mmMV52 (50Hz), MV62 (60Hz)U SET (V)supply141112gn yeok failtok alrdalarmtV AgnrdThe MV52(50Hz) or MV62(60Hz) protects control systems,contactors and motors during undervoltage against thermaloverload and malfunctions.The monitoring can be set precisely in volts fromUN –30% up to UN.The switching off or on again follows delayed by 0,1/0,5 or1second.2 LEDs show the definite monitoring status.VSetting rangeHysteresist (fail-al-ok)Data at Tamb. = 20°C0,7(–30%)UN...UN5%0,1/0,5/1sSwitching current/voltageSwitch ratingMechanical switching cycles6A 250VA1500VA/...180W30x10 6Voltage tolerancePower consumptionAmbient temperature... UN +15%3,5VA,1W(–25)–10...+60°CBS13-KBS13-G(incl.paper)45TS3590114413Order-Nr.50HzMV52 /AC230VMV52 /AC115V60HzMV62 /AC120VAccessoriesLabel (5Piece)Label (5Piece)BS13-GBS13-K114 KAT2008This edition replaces all previous issues.Availability, errors and specifi cation subject to change without notice.COMAT AG • BERNSTRASSE 4 • CH-3076 WORB • SCHWEIZ www.comat.chTel. +41 (0)31 838 55 77 • Fax. +41 (0)31 838 55 99 • info@comat.ch