1 - Multiprox

Pulse Shaper Pulse ShaperCPF11,22 DIN 2xSolid-StatePulse shaper with timing functionTo stretch respective to limit control pulses.Suitable for NAMUR sensors respective toanalyze fast sequences with high revolutionsand short pulses.Tamb. operation/storage:-25..+60/-40..+85°CCPF11Single Channel Pulse Shaper• Input reversible (E-E)• Input and output timesseparately settable• 3(6) functions to choose• Built-in free wheel diode 1A• LED display for E and O• Settable functions:K L A K ACPF22Double Channel Pulse Shaper• Input/output galvanicallyisolated 4kV• Input and output timesseparately settable• 2 functions to choose• LED output display for each channel• Settable functions:NAMUR sensor19…28V+ +E2SNAMURE1CPFand others:www.comat.ch15…32V+ +SPNPMAXMINThree-wire sensorE1CPFDC≤10%Settable times:input pulse≥1/5ms15 ÷32VD+PNP2A 15...32Vd2mA 10V+O3K3KSE1FD0,8AR L4K7E2CPF11/DC24Voutput pulse5÷600ms++15 ÷32VD1S 2S1E1 1E2 2E1 2E211K5K64kV150mA PNP+ 1O 2O+ 1R L 2R L10÷45VDCPF22/DC24VKtSRLtSRAtSRCPF11CPF2275TS 35Settable times:input pulse output pulse≥0,5/2,5ms 50/200ms150mA 45Vd2mA 10VPulse shapingS (pulse or continuous contact)⇒ R on for tS no influence on R and tPulse shaping retriggerable(subsequ. time operation from 0)S (pulse or continuous contact)⇒ R on for tS on for t = t RESETOff delayS ⇒ R onSOFF ⇒ R off with delay2,5Example of orderPulse shaperCPF11/DC24V4,217,585 641046 KAT2008This edition replaces all previous issues.Availability, errors and specifi cation subject to change without notice.COMAT AG • BERNSTRASSE 4 • CH-3076 WORB • SCHWEIZ www.comat.chTel. +41 (0)31 838 55 77 • Fax. +41 (0)31 838 55 99 • info@comat.ch