User's Manual for CM6G - Yokogawa

More documents

Recommendations

Info

10-210.2 Regular CheckRefer to Figure 6.2 , 6.3 and 6.4. The flow sheet depends on the specification.10.2.1 Cleaning of the Orifice Plate and Replacement of O-ringWhen something like dust adhere to the orifice holes, the output power decreased.There<strong>for</strong>e, clean them with the following way:CROTCHET JOINTHOLDINGSCREWORIFICEASSEMBLYO-RING (P16)ORIFICEPLATECOVERPLATEO-RING (P20)HEX. HOLE SCREWF10-2.aiFigure 10.2 Orifice Systema) Suspend the supply of the sample gas, then blow the gas line with the air.b) Remove the crotchet joint.c) Turn the holding screw and take out.d) Pull out slowly to the direction as shown on Figure 10.2.e) Loosen the set screw by using the hexagonal wrench attached there-to and take out the orificeplate together with the cover plate.f) For the cleaning use something like a supersonic cleaner and never insert into the orifice holesanything like a stick or rod.g) When the O-rings are worn out, replace them with the spare parts.h) When the cleaning and replacement completed, assemble the parts according to the ordercontrary to above mentioned.Remarks: The orifice system is temperature controlled by a plate heater, so better finish thecleaning and replacement as quick as possible.IM 11R02A01-02E
10-310.2.2 Fulflo Filter (For Steel Mill Use)The material of the element is polypropylene. The cleaning and the replacement of the element shallbe carried out as under mentioned:a) Turn the nut and remove the cover.b) Pull out the element and clean or replace.c) Assembly is carried out in contrary order to above.d) When the packing or gasket is worn out, replace it.NUTPACKINGCOVERGASKETTENSION BOLTELEMENTCASEF11-4.aiFigure 10.3 Fulflo Filter10.2.3 Line Filter (For Town Gas Use)Disassemble 3 screws, and open the cover, there inside exist the element. If it is stained, replace by anew one. Also if the O-ring is fatigued, replace it.SCREWO-RINGGAS INLETFILTERELEMENTELEMENTGUIDEBODYFigure 10.4 Line Filter GAS OUTLETF11-5.aiIM 11R02A01-02E
Page 1:
User’sManualModel CM6GGas Calorim
Page 4 and 5:
iiTIPThis symbol gives information
Page 7 and 8: iModel CM6GGas CalorimeterIM 11R02A
Page 9 and 10: iii9.4 Calibration of the Density M
Page 11 and 12: 1. Outline 1-1Model CM6G Gas calori
Page 13 and 14: 2. Specifications 2-12.1 Standard S
Page 15 and 16: 2-3Utility : Water : Approx. 0.2 l/
Page 17 and 18: 2-52.2.4 OptionName Part no. Descri
Page 19 and 20: 2-72.4.2 For Town Gas Application (
Page 21 and 22: 2-92.4.4 Dimensions of Options1. Pr
Page 23 and 24: 3-13. InstallationsObserve the foll
Page 25 and 26: 4-14. Outside PipingsThe connection
Page 27 and 28: 5-15. External WiringsExternal wire
Page 29 and 30: 6. Construction and FunctionTypical
Page 31 and 32: 6-3Standard Flow Sheet1. Town Gas A
Page 33 and 34: 6.3 Differential Pressure Detection
Page 35 and 36: 6-7POWERLampIGNITLampMEASLampALARML
Page 37: 6-96.4.2 High/Low Alarm ActionHighe
Page 42 and 43: 6-146.5.3 Correcting ComputationAs
Page 44 and 45: 6-166.6 Density MeterThe GD400G is
Page 46 and 47: 7-27.4 Supply of the AirOpen valve
Page 48 and 49: 7-47.7 Air Differential Pressure Ad
Page 50 and 51: 8-28.2 Stopping Operations8.2.1 Lon
Page 52 and 53: 9-29.1.2 For Steel Mill UseSEE ALSO
Page 54 and 55: 9-49.3 Calibration of the Computing
Page 58 and 59: 10-410.2.4 Washing Bubbler or Press
Page 60 and 61: 10-610.3 Check at the Regular Servi
Page 62 and 63: Blank Page
Page 64 and 65: 11-211.1.2 For Steel Mill UseAs for
Page 66 and 67: 11-47) When the density meter is at
Page 68 and 69: Blank Page
Page 70 and 71: 12-2b) Print circuit board assembly
Page 72 and 73: 12-412.3 Preheater E7023NGNo. Name
Page 74 and 75: 12-612.8 Temperature Controller E70
Page 76 and 77: 2< Principle of Measurement>When us
Page 79 and 80: Revision Informationi Title Manual
Page 81 and 82: User’sManualModel CM6GGas Calorim
Page 83 and 84: 2-2Utility :Instrument Air : Approx
Page 85 and 86: 2-42.2.2 Standard AccessoriesFollow
Page 87 and 88: 5-25.1 Notes on WiringWARNING• Ca
show all

User's Manual for CM6G - Yokogawa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?