Spectrum Power 3 Programming - Siemens

Spectrum Power 3DNP3 - Introduction to SCADA CommunicationThis course introduces participants to the concepts of DNP3 communication. Participants gain an understandingof the basics of DNP3 Communication, Data Objects, Controls, Message Structure and templates.General InformationCourse Code: E0593Length: 2 DaysAudienceThis course is designed for those who areresponsible for supporting data acquisitionusing the DNP 3.0 protocol, including:• Communication Administrators• Database Engineers• Programmer/AnalystsPrerequisitesIntroduction to DNP3 Communication - Youmust have prior experience to any Byte orientedProtocol communications.GoalsUpon completion of this course, the studentsshall be able to:• Describe the DNP3 Communication Layers,including the Data Link Layer andthe Application Layer (Request & Response).• Describe the use of Digital (Object 1,2),Analog (Object 30) & Accumulator (object21 etc).• Trace the flow of DNP3 Data Objectsfrom devices to Spectrum Power 3.• Identify the purpose of each field in theDNP3 Message structure.• List the different types of Controls.• List the different options for Digital andAnalog controls.• Explain the flow of DNP3 controls fromdevices to a Spectrum Power 3 System.• Explain the importance of each Layer ofthe RAW message structure.• Extract identifiers and values from theRAW message structure.• Locate the corresponding data in theSpectrum Power 3 Data base.• Compare the DNP3 Polling options.• Configure Data Acquisition using theDNP3 Polling options.Topics• Overview DNP3 Communication• DNP Data Objects• DNP Controls• Message Structure• DNP Polling Options• Examples• DNP Protocol related to SIEMENS System03/06/12Course Descriptions - 12 - Siemens Energy, Inc.Energy Automation