Installation & Operations Manual - Master-Bilt

Alarm Delay ALrd Time delay beforethe alarm goes offafter temperaturefall off the two alarmset pointsNumber ofDefrostsDefrost StartTimeDefrostDurationnodFdEF1-8dEFdNumber of defrostsper dayStart time of eachdefrostDefrost durationtime(back-up for defrostterminationtemperature)Fan Delay FAnd Delay time for thefan after defrost(back-up forfancut-intemperature)Range: from 0 to 59 min 30from 0 to 8 (0 means 1 defrost 3every48 hours)Hour and minute selectable (def0 default = 1AM)(dEF1 default = 6 AM), (dEF2 default = 2 PM),(dEF3 default = 10 PM), (dEF4 default = 12 AM),(dEF5 default = 3 PM), (dEF6 default = 3 AM),(dEF7 default = 9 PM), (dEF8 default = 9 AM)Range: from 0 min to 4 hours 35Range: from 0 to 15 min 2Pump Down Pudn Pump down duration Range: from 0 to 59 min 0Drip Time driP Drip time duration Range: from 0 to 59 min 2SetpointDifferentialdiF°Range: from 1 to 25°5° FTemperatureInitiatedDefrostDefrostTerminationTemperatureFan Cut-InTemperatureLowTemperatureAlarmHighTemperatureAlarmtdEFdEF°FAn°ALLoALHiCut-in temperaturedifferential Note:cut-in is cut-out plusdifferentialTemperature thatwill initiate adefrost cycleTemperature in theevaporator that willterminate the defrostcycleTemperature in theevaporator that willturn the fan on afterdefrostLow temperaturesetpoint that willmake the alarm gooff and the errormessage appear onthe displayHigh temperaturesetpoint that willmake the alarm gooff and the errormessage appear onthe displayRange: from – 40 to 40°For – 40 to 4°CRange: from 0 to 75°For –18 to 25°CRange: from – 40 to 60°For – 40 to 23°CRange: from – 40 to 83°For – 40 to 23°CRange: from – 40 to83°F or –40 to 23°C(Not used) inthis case50° F30°F-40°F50°F12