ZUCCHINI LMP 001-079_EN.indd - Legrand

STRAIGHT ELEMENTSThe components and the features of the TS straightelements are:• casing made with a hot galvanized steel (Senzimir);• sheet metal thickness: 1.2 mm (1.5 mm for 250A);As for the 63A (MTS63) rating, the casing is madeof extruded aluminium with a minimum thicknessof 1.4 mm; it has good mechanical rigidity andpreserves its linearity over time.• number of conductors: 5 conductors with the samesection 3L+N+PE (4 for the TS 250A), shaped toguarantee excellent mechanical strength. Theconductors are made of 99.9% pure electrolyticcopper;• separation between the conductors using fibreglassreinforced plastic material ensuring a V1 selfextinguishingdegree (according to UL94) and incompliance with the glow-wire test according toIEC 60695-2-10;• the slot along the underside of the busbar allowsa current trolley to slide in it. The size of the slotensures an IP20 degree of protection;• an independent electrical junction terminal system(made of bronze plates) for fast and reliableconnection of the live conductors and the PE. Theterminals make an electric connection between theconductors, with a smooth flat lower part in orderto make the trolleys slide more easily. The wholebusbar is “fire retardant” in compliance with thestandard IEC 60332-3.Work station installationInstallation for mobile machineryMRMEDIUM RATINGTSTROLLEY SYSTEMCrane installationGENERAL FEATURES111LOW-MEDIUM POWER GENERALCATALOGO CONDOTTI CATALOGUESBARRE