ZUCCHINI LMP 001-079_EN.indd - Legrand

HLHigh LightingFEED UNITSAllows you to electrically power the HL line throughone (HLs) or two separate lines (HLd); the installationis carried out with a quick junction connection as withthe straight elements.The feed units have terminals for the connection offlexible cables for sections of up to 25 mm 2 . There isan anti-pullout cable clamp inside the feed unit. Theentrance point for the incoming cable is positionedon the end of the feed unit.Standard end feed unitEND COVERThe end cover ensures the IP 55 protection degree atthe end of the line.Standard end coverFIXING DEVICESSpecific accessories are available for attaching thebusbar to the structure of the building (directly orwith a steel chain or cable). The accessories foroverhead fixing are:• snap clamp: the snap-on installation is extremelyfast. This bracket is suitable both for overhangingthe busbar to the ceiling and for hanging productssuch as fluorescent lamps, tap-off boxes, etc., tothe busbar itself;• snap clamp with ring or hook: the ring or the hookenables to hang lamps easily;• simple bracket: used with the ceiling bracketholder, it enables the installation the busbardirectly onto the ceiling at a distance of about25 cm;• wall bracket: enables the fixing of the busbardirectly onto the wall of a building, setting it at therequired distance enabling the installation of thenecessary components.Fixing accessories for fastening the busbar run to thestructure and hanging the lamps onto the busbar24 HL - HIGH LIGHTING