ZUCCHINI LMP 001-079_EN.indd - Legrand

Trunking components andadditional elementsDepending on the different installation requirementsZucchini can provide various technical solutions:a) flexible joint: used to make changes of direction orto avoid possible interferences that may be found onthe path of the busbar.Their main technical features are:• same connection method as the straight elements;• electrical and mechanical connection with oneoperation;• standard degree of protection: IP 55;• continuity of the protective conductor, made from thecasing of the element itself, guaranteed by tighteningthe special connection screw;b) cable trunking with cover: this accessory, whichcan be positioned in the upper part of the busbar,can be used to distribute auxiliary circuits, it is anintegral part of the busbar run using special spacersand brackets which support the busbar trunkingsystem firmly. The trunking part is 3 m long and itsdimensions are 28x28 mm;c) intermediate feed unit: it can power the busbar froman intermediate point of the line, thus reducing thevoltage drop at the end of the line and/or makingthe installation easier when the electric energysupply point is near the middle of the line.The end capcompletes theinstallation of thelines and guaranteesthe IP 55 degreeof protection of theline.Straight elements, withtap-off outlets every1000 mm on bothsides, with pre-installedblanking accessory.Phase selectiontap-off plugs, alsoavailable with fuses.Ring for suspending alamp or for suspendingother accessories ofthe busbar. (boxes,loudspeakers, etc.)Hook for suspending alamp or for suspendingbusbar itself and otherdevices (lamps, etc)Snap-on bracketthat can be used forsuspending the lineand devicesPARTS OF THE LINESingle-phase selection plugPlug with fuse carrierCeiling suspension bracket26 HL - HIGH LIGHTING