ZUCCHINI LMP 001-079_EN.indd - Legrand

SLSerie LuceFEED UNITSThe feed unit is assembled to the run in an identicalmanner as with the straight elements. The feed unitshave terminals for the connection of copper cablesfor sections of up to 25 mm².There is an anti-pullout cable clamp jumper insidethe power supply. The entrance point of the cables ispositioned on the end of the feed unit.Feed unitEND COVERThe end cover ensures the IP 55 protection degree atthe end of the line.End coverFIXING SUPPORTSSpecific accessories are available for fixing the line tothe structure of the building (directly or with a steelchain or cable). The accessories for overhead fixingare:• snap clamp: the snap-on installation is extremelyfast. This bracket is suitable both for overhangingthe busbar to the ceiling and for hanging productssuch as fluorescent lamps, tap-off boxes, etc., tothe busbar itself;• snap clamp with ring or hook: the ring or the hookenables to hang lamps easily;• simple bracket: used with the ceiling bracketholder, it enables the installation the busbar directlyonto the ceiling at a distance of about 25cm;• wall bracket: enables the fixing of the busbardirectly onto the wall of a building, setting it at therequired distance enabling the installation of thenecessary components.Fixing accessories for fastening the busbar run to the structure and hangingthe lamps onto the busbar46 SL - SERIE LUCE