BA627E 4/20mA manual set point station [set ... - BEKA Associates

SPECIFICATION DIMENSIONS (mm)OutputCurrentResistancePower supplyVoltage3.0 to 22.0mAGreater than 1MΩ6.1 to 30V10 to 30V when optionalbacklight is loop powered.Panel cut-outRecommended panel cut-outTo achieve an IP66 seal betweenthe instrument and the panel90 +0.5 / -0.0 x 43.5 +0.5 / -0.0DIN 43 70092.0 +0.8 / -0.0 x 45 +0.6 / -0.0AccuracyControl resolutionTemperature effect1 least significant digit of thedisplay, or 0.3µA whichever isgreater.Less than 2µA/°C65DisplayTypeZeroSpanDecimal pointZero blankingDirectionLiquid crystal, non-multiplexed5 digit 11mm high with 31segment bargraph.Adjustable between 0 &±99999 with 4mA output.Adjustable between 0 &±99999 with 20mA output.1 of 4 positions or absentBlanked apart from 0 in frontof decimal point.Display may increase ordecrease with increasing4/20mA output.Push buttons(Function in operating mode)‘E’ and ▼ or ▲ Scrolls output current down or up▼ Shows display calibration with 4mAoutput.▲ Shows display calibration with 20mAoutput.‘P’ Displays output current in mA, as a% of span or provides access topre-set outputs.EnvironmentalOperating temp -40 to 70°CStorage temp -40 to 85°CHumidityto 95% at 40°C noncondensingVibrationReport availableEnclosureFront IP66, rear IP20EMCComplies with 2004/108/ECMechanicalTerminalsWeightAccessoriesBacklightLoop poweredSeparatelypowered.Printed scale cardScrew clamp for 0.5 to 1.5mm²cable, removable.0.2kgGreen, may be loop orseparately powered.Set point station + backlightsupply 10 to 30V.9 to 30V at 22mABlank card fitted to eachSet Point Station can besupplied typeset with specifiedengineering units.96Set point StationTERMINAL CONNECTIONS12 13 14+ - - SeparatelypoweredLoop poweredCommonTerminals foroptional backlightHOW TO ORDERBA627EScalecard5 6 7AB7.548CommonTerminals foroptional externalrotary encoderTerminals foroptional backlightare shown in outline1 2 3 4+4/20mATerminals 2 & 4 areinternally linked forjoining return4/20mA wireBA490 Rotary encoder Panel mounting IP65 sealed rotaryencoder which provides analoguecontrol of the BA627E output current.See separate datasheet.Please specifyModel numberBA627EDisplay at:4.000mA XXXX Include position of decimal20.000mA XXXX point & sign if negative *AccessoriesDisplay backlightScale cardTagExternal rotary encoderPlease specify if requiredBacklightLegend requiredLegend requiredBA490Tag legendSpecified tag number orapplication thermally printedonto rear of the instrument.* Will be set to display 0.00 at 4mA output and 100.00 at 20mAoutput if calibration information is not supplied. Calibration caneasily be changed on-site.02