About our company - FOXBORO ECKARDT GmbH

In ProcesslMeasuring range0 .. 35 cm to 0 .. 3 m /0 .. 1 feet to 0 .. 9 feetlAt given level:lMeasuring of densitylPosition of interface of two liquidslProcess temperature–196 to +500 °C (–320 .. +932 °F)lProcess pressurevacuum to 250 bar /ANSI Class 1500lNominal widths DN 80 and DN 100(3 inch, 4 inch)lThe span can be set over a 1:5ratiolA wide selection of materialsfacilitates service under corrosiveconditionslMaterial (process wetted)Carbon steel 1.0460, StainlessSteel 1.4404 or Hastelloy ClMaterial opproval certificates acc.to EN 10204-3.1 availablelAccuracy < 1 %lSensor with no moving partslReliable interface measurement– also at diffuse interfacelRel. Humidity up to 100 %,condensation permittedlOptional Heating JacketProtectionlProtection class IP 55lEplosion protection acc. to ATEXFor use at Zone 1, group IICFor use at Zone 0 for tanks orpipesII 1/2 G c IIB + H 2 + C 2 H 2II 1/2 G c IIClLicensed for use on sea ships inthe Germanische Lloyd class, oron other structures classified byGermanische LloydOperationlOutput 0.2 to 1 bar or 3 to 15 psilSupply air 1.4 ± 0.1 bar / 20 ± 1.4psi, low air consumptionInfluence in the ProcessTemperaturePressureSteam, FogDielectric constantFoamVibrationsMotion of FluidDiffuseInterfaceDisplacer strokeCorrosive FluidsVessel materialDepositson vesselDepositson displacer " * + .167LP Transmitterwith heating jacket4very little influence4very little influence4no influence4no influence4no influence4minimised due to damping4very little influence(if necessary use protectingtube or displacer chamber)4no influence4Zero (no position alterationat liquid level change)4no influence(instruments are delivered inresistant materials)4no influence4no influence4very little influence " , - $ % 2204DC Chamberwith heating jacket " , +13