Visualize and interpret the geometry, heterogeneity and lateral ...

4.2 Channel body Group 2Channel body group 2 consists of 10 different channel bodies. As mentioned in theintroduction, some of these channels bodies are discussed by comparing the geometricalindications with the lateral continuation of logged sections from outcrops of channel bodies.This gives an indication of what environment the channel body was deposited in. Where thereare no logged sections available, the channels are interpreted by use of geometrical indicatorsfound on the photos and in the PhotoModeler-model only, and hence are more brieflydiscussed.Table 4.2: Overview of the channel bodies described in Chapter 4.2: channel body group2.ChannelbodySize (thickness, width) Logged Probability forchannel body5 15 m thick and 200 m wide No Medium->High6 11 m thick and 210 m wide No Medium7 6 m thick and 145 m wide No Medium8 8 m thick and 240 m wide No Medium9 The PhotoModeler-model is notoriented properly, hence it is difficult toevaluate its thickness on the westernside of the island, but on the easternside it is approximately 19 m thick and475 m wide.Comparedwith a lognearbyHigh10 25 m thick and 815 m wide Yes High11 15 m thick and 232 m wide No Medium12 20 m thick and 917 m wide No Medium13 22 m thick and 210 m wide Comparedwith a lognearbyMedium->High14 15 m thick, while the width cannot becalculatedComparedwith a lognearbyHigh48