13.07.2015 Views

Setup of a Drift Tube Muon Tracker and Calibration of Muon ...

Setup of a Drift Tube Muon Tracker and Calibration of Muon ...

Setup of a Drift Tube Muon Tracker and Calibration of Muon ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Table A.1: Variables that can be set by the slow control <strong>and</strong> their default values forthe tracker setup.Variable Description DefaultCRATE Crates in use "0"SLOT Slots in use "1 5"TPDELAY Delay for testpulse ’200’THRESH Signal threshold in mV ’50’THR AMP Send single threshold to chosen amplifier 0THR TUBE Send single threshold to chosen tube 0NB TP Number <strong>of</strong> testpulses ’100’TP PAUSE Time between testpulses ’0.01’TP ODD Switch for testpulses on odd channels "on"TP EVEN Switch for testpulses on even channels "on"TRM1 Mask for OTB input channel 1 "on"TRM2 Mask for OTB input channel 2 "on"TRM3 Mask for OTB input channel 3 "<strong>of</strong>f"TRM4 Mask for OTB input channel 4 "<strong>of</strong>f"TRM5 Mask for OTB input channel 5 "<strong>of</strong>f"TR MASK Corresponding HEX value for OTB mask 3TRTPM1 Apply OTB testpulse to input channel 1 "on"TRTPM2 Apply OTB testpulse to input channel 2 "on"TRTPM3 Apply OTB testpulse to input channel 3 "on"TRTPM4 Apply OTB testpulse to input channel 4 "on"TRTPM5 Apply OTB testpulse to input channel 5 "on"TRTP MASK Trigger testpulse mask for input channels (hex) 0x31TRS0 Select trigger configuration 2/3 "on"TRS1 Select trigger configuration 3/4 "<strong>of</strong>f"TRS2 Select trigger configuration 4/5 "<strong>of</strong>f"TRS3 Select trigger configuration r<strong>and</strong>om "<strong>of</strong>f"TR SEL HEX value for trigger configuration 0TR CRATE Crate <strong>of</strong> triggerboard 0TR DELAY Delay <strong>of</strong> trigger in units <strong>of</strong> 5ns 200TR PULSE Pulse width <strong>of</strong> trigger signal 200TTP PAUSE Time between trigger testpulses ’0.01’NB TTP Number <strong>of</strong> trigger testpulses ’100’102

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!