Baldwin TD and Hicks TW, Assessment Calculations for Human ...

0977-6Version 1Appendix A - Parameter ValuesThis appendix contains the following data and parameter information:Table A.1:Radioactive decay data and secular equilibrium assumptions.Table A.2: Inventories of radionuclides (TBq) for Case A.Table A.3: Inventories of radionuclides (TBq) for Case B.Table A.4:Spatially variable parameters.Human intrusion event and dose pathway parameters are recorded in the followingtables in Appendix C of Hicks and Baldwin (2011):Table C.8:Table C.9:Table C.10:Table C.11:Table C.12:Table C.13:Table C.14:Table C.15:Table C.16:Table C.17:Table C.18:Table C.19:Table C.20:Table C.21:Parameters for event B1a (borehole drilling).Parameters for event B1b (trial pit excavation).Parameters for event B1c (laboratory analysis).Parameters for event B3a (construction).Parameters for event B3b (site occupancy).Parameters for event B7 (farm/small holding).Parameters for event C1 (informal scavenging).Parameters for event C2 (local organised material recovery).Concentration and transfer factors.Dosimetry.Data on borehole drilling.Data on trial pit excavation.Data on borehole and trial pit sample analyses.Data on construction excavations.The model parameters are explained in Hicks and Baldwin (2011, Appendix B).Source references for parameter values are provided. Identification of parametervalues and their inclusion in GoldSim has been checked as part of a verificationprocess. Procedures have been implemented to guide and document this process inorder to ensure that each stage of parameter value identification and modelimplementation has been verified appropriately.Galson Sciences Ltd 51 21 March 2011