Product Guide - A. Stucki Company

Case Classification: As in the caseof friction component damage, a draftgear must be rebuilt if the case hasbeen subject to excessive wear or isdamaged. Gears with cases that meetthe following are also consideredFC/C/D:1. Wall thickness – visibly worncase wall2. Torch cut – 1 inch or moreReconditioning ServicesScrap Classification: Gears with bulges,split cases or cracks in excess of 2 inchescannot be repaired and are classifiedas scrap. Also, gears not listed on theIDG list of acceptable gears (detailedlist can be found at www.draft-gear.com)are either not reconditionable or areobsolete and therefore classified as scrap.www.stucki.com104