Product Guide - A. Stucki Company

Reversible Brake BeamThree steps for converting either RH orLH in the field.First• Use screwdriver to pull retainer & pin(If tight, pin may be pushed from theopposite end, by the screwdriver).Second• Insert steel bar in strut lever slot.• Tilt rotating strut 90 degrees, until theslots in end casting match slotsin strut.Third• Re-insert pin with groove end last.• Reapply retainer by hand at pingroove (push it safely in place withscrewdriver).Side BearingsBrake Beamswww.stucki.com96