Code Reader 2 - Car diagnostic tool

More documents

Recommendations

Info

1. Setup.Insert USB security key into your PC. Connect Code Reader-2 to your PC via data cable.Turn ON the Code Reader-2. Place security card on over the hole of device and keep it therewhile login will accepted. Start the software. Choose COM port, language and press“Transmission test” button on “Setup” page. If transmission will be establish you see deviceinformation in “Software”, “Hardware”, “Serial number” windows. If you see the window“Transmission error” check COM port choice and power supply.2. Main operations.Place transponder or key near the device hole.Press “Identify and read” button for identification and reading any transponders and keys.www.obd2express.co.ukThen you will see transponders information.2
Code Reader-2 can identify and read following types of transponders:11 Temic12 Temic13 Megamos14 Megamos15 Megamos20 T533 Phillips40 Phillips Crypto41 Phillips Crypto42 Phillips Crypto44 Phillips Crypto45 Phillips Crypto46 Phillips Crypto 248 Megamos Crypto4C Texas60 Texas Cryptowww.obd2express.co.uk3
Page 1: Code Reader 2Table of Contents1. Se
Page 5 and 6: 68 Texas Crypto + + EH2, TPX2+ Avai
Page 7 and 8: This software version supports foll
Page 9 and 10: There are two function more in this
Page 11 and 12: T5:Megamos 48 Crypto:www.obd2expres
Page 13: Texas 4D Crypto:10. Texas Crypto so

Code Reader 2 - Car diagnostic tool

Create successful ePaper yourself

Delete template?

Save as template?