CG–3/3M AUTOGRAV - Scintrex

Getting StartedFigure 2Autograv Transportation CaseUNPACKING1. Pull up the tab of the link lock and turn the tab counter-clockwise tounfasten the lock from the keeper plate.2. Repeat step 1 for the other link lock.3. Open the Autograv transportation case by lifting the cover.4. Remove the protective foam from the left hand side of thetransportation case to view the top of the Autograv dust cover plate.5. Remove the Autograv from the transportation case and visually inspectfor any physical damage that may have occurred during transportation.Important: If there is any evidence of physical damage, immediatelycall Scintrex Limited.6. From the right hand side of the transportation case, remove theAutograv accessories.REMOVING THE DUST COVER1. Remove the dust cover plate on the Autograv by pressing down on thetwo latches and sliding the cover away from the instrument.2. Place the dust cover back inside of the transportation case for safekeeping.Note:If you are shipping the Autograv, insert the dust cover to protectthe instrument.2-2 Autograv CG–3 Manual