CG–3/3M AUTOGRAV - Scintrex

Getting StartedTHE DISPLAY DURING READINGSAfter you press the START key to initiate a reading, the display goes throughtwo display changes to enable you to level the Autograv before you actuallystart a reading.The first display indicates that the Autograv is in the ADJUST mode. Within afew seconds, the display changes to show you the values of the X and Y tilts,as follows:LEVELING PARAMETERSVALUESTILTS X:XXX 1ADJUST Y: XXX 0LINE 100 0STATION 0 %AVAILABLEMEMORYREADVERTICALLYTo level the instrument, read the display and analog tilt meters, and then adjustthe tripod until the Autograv is level.2-28 Autograv CG–3 Manual