CG–3/3M AUTOGRAV - Scintrex

Getting StartedNote:If the keypad is not responding to a key press, then you needto reset the Autograv by pressing and holding the ON/OFF(w) key for more than 5 seconds.Top Functions (Operations Mode)KeywON/OFFDescription— Turns the instrument on and off.When you turn on the instrument, the previous menuoption appears on the display (i.e. the status of the instrumentis saved when the Autograv is turned off).r1METHOD2DATA384LINENote:If the instrument is busy printing, measuring orhung-up, then you must press the ON/OFF keyfor more than 5 seconds, to reset the instrumentRECORD — Enters measurements into memory.— Displays the method/mode in which the instrumentis currently operating.The selectable modes are FIELD, CYCLING or NONE.— Shows on the display the set of measurementparameters being measured or just completed.MEMORY — Recalls and displays data that is stored inmemory by scrolling.— Shows the present line number and/or a linenumber recalled from memory (if applicable). The currentline appears on the top line while the line numberfrom memory is on the second line.It also enables you to change the current line number.2-8 Autograv CG–3 Manual