HOBAS Gravity Pipe Systems Technical Product Data

A05Jacking Pipes de 272 - 501NON-PRESSURE PIPESGRP jacking pipes with flush coupling (GRP or stainless steel) - allowable jacking forces. The standard length of thePipe is 6m. Lengths of 1 / 2 / 3 m are available on request.Allowable jacking force [kN]*de [mm] SN SN SN SN SN SN SN SN SN SN SN SNCoupling 32000 40000 50000 64000 80000 100000 128000 160000 200000 320000 640000 1000000272 e [mm] 19 24m [kg/m] 33 41stainless steel F [kN] 204 297324 e [mm] 20 23 28m [kg/m] 42 48 57stainless steel F [kN] 273 341 452376 e [mm] 19 20 23 27 32m [kg/m] 47 49 56 65 76stainless steel F [kN] 297 324 405 424 638401 e [mm] 19 20 21 24 28 34 39m [kg/m] 50 53 55 62 72 86 97stainless steel F [kN] 315 344 373 459 572 736 868GRP F [kN] 647 779427 e [mm] 19 20 21 24 28 34 39m [kg/m] 54 56 59 67 77 92 105stainless steel F [kN] 342 373 405 497 618 795 938GRP F [kN] 696 839478 e [mm] 21 22 25 27 29 33 41 46m [kg/m] 66 72 78 84 90 101 124 137stainless steel F [kN] 449 519 588 657 725 859 1120 1278GRP F [kN] 1015 1173501 e [mm] 20 22 24 26 28 30 35 43 48m [kg/m] 66 73 79 85 91 98 113 136 150stainless steel F [kN] 434 509 582 655 727 798 974 1247 1412GRP F [kN] 864 1137 1302Wall thicknesses and pipe masses as minimum or guidelines plus tolerances to HOBAS company standard.* The jacking force (kN) corresponds to a safety factor of 3.5 times against the ultimate force calculated. Static calculation of specific projects canresult in differing allowable jacking forces.All figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time ofpublication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any liability. Thisalso applies to errors, omissions and changes to technical data without notice.