HOBAS Gravity Pipe Systems Technical Product Data

Non-Pressure Pipes DN 1100 - 3600A01NON-PRESSURE PIPESThe standard length of the Pipe is 6m. Lengths of 1 / 2 / 3 m are available on request.SN 2500 SN 5000 SN 10000 SN 15000 SN 16000 SN 20000DNDiameter seriesde m e m e m e m e m e m e[mm] [kg/m] [mm] [kg/m] [mm] [kg/m] [mm] [kg/m] [mm] [kg/m] [mm] [kg/m] [mm]1100 - 1099 112 16 141 20 175 25 196 28 201 28 215 301200 B1 1229 140 18 174 22 216 27 244 31 249 31 267 341280 - 1280 152 19 189 23 236 28 265 32 270 33 289 351350 - 1350 169 20 210 24 262 30 294 34 300 34 321 371400 B1 1434 190 21 237 26 294 32 331 36 338 36 362 391500 - 1499 208 21 258 27 322 33 362 37 368 38 395 411535 - 1535 220 22 274 27 340 34 382 38 389 39 418 421600 B1 1638 249 23 312 29 387 36 434 41 443 41 475 441720 - 1720 274 25 343 31 425 38 478 42 491 44 522 461800 B1 1842 314 26 393 33 487 40 547 45 559 46 599 501940 - 1940 346 27 434 34 538 42 609 48 621 49 661 522000 B1 2047 386 29 484 36 600 45 675 50 688 51 738 552160 - 2160 432 31 539 38 667 47 750 53 765 54 821 582200 B1 2250 465 31 584 39 723 49 813 55 836 56 890 602400 - 2400 533 34 665 42 823 52 926 59 945 60 1012 642400 B1 2454 557 35 694 43 860 53 968 60 987 61 1059 662555 - 2555 604 36 752 45 932 55 1048 62 1069 64 1147 683000 - 3000 829 42 1033 52 1281 65 1440 73 1469 74 1575 803600 - 3600 1189 50 1485 62 1840 77 2085 88 2127 89 2265 95Wall thicknesses and masses as guidelines (plus tolerances)The standard length is 6 m (+0/-60 mm). Some pipes can also be supplied in shorter lengths depending on availability.All figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time ofpublication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any liability. Thisalso applies to errors, omissions and changes to technical data without notice.