HOBAS Gravity Pipe Systems Technical Product Data

Tangential Manhole DN 1000 - 3600D02MANHOLESTangential Manhole consisting of:1 Main pipe (from DN 800)2 Coupling on main pipe3 Manhole pipe (Standard DN 1000 or DN 1200)4 Bench (sanded)5 Coupling on manhole pipe (for design in several parts)6 Ladder7 Manhole cover (accessories on request)To prevent excessive loads on the laminates and deformation at the joints between the actual manhole and pipe, these manholeshave to be encased in concrete. This safety measure can be dispensed with if installation conditions allow and the Technical Serviceagrees.All figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time ofpublication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any liability. Thisalso applies to errors, omissions and changes to technical data without notice.