HOBAS Gravity Pipe Systems Technical Product Data

Standard Manhole DN 1000 - 3600D01MANHOLESDNOutlet[mm]1000 150 - 5001100 150 - 5001200 150 - 6001400 150 - 8001500 150 - 9001600 150 - 11001700 150 - 12001800 150 - 12002000 150 - 16002200 150 - 17002400 150 - 18002400 150 - 20002555 150 - 20003000 150 - 24003600 150 - 2400Standard Manhole consisting of:1 Anti-flotation anchor (either as GRP base plate or laminated over with concrete upturn)2 Manhole pipe3 Port4 Bench (depending on national circumstances on site or directly from factory)5 Coupling on manhole pipe (for design in several parts)6 Ladder7 Manhole cover (accessories on request)The HOBAS Standard Manhole is made of GRP throughout and corrosion resistant both on the inside and outside. Itconsists of a HOBAS Pipe with a suitably designed channel.All figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time ofpublication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any liability. Thisalso applies to errors, omissions and changes to technical data without notice.