HOBAS Gravity Pipe Systems Technical Product Data

T-piece DN 150 - 800C02FITTINGSTeesInspection piecesT-shaped fitting consisting of segments, lengths of main pipe and outlet. Outlet with standard coupling or inspectionopeningDN 2 150 200 250 300 350 400 500 600 700 800de2[mm]168 220 272 324 376 427 530 616 718 820L 2* 240 245 245 255 260 265 275 285 330 330DN 1de1[mm]L 1* [mm]1600 1638 1500 1500 1500 1500 1500 1500 1500 2000 2000 20001720 1720 1500 1500 1500 1500 1500 1500 1500 2000 2000 20001800 1842 1500 1500 1500 1500 1500 1500 1500 2000 2000 20001940 1940 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002000 2047 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002160 2160 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002200 2250 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002400 2400 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002400 2454 1500 1500 1500 1500 1500 1500 1500 2000 2000 20002555 2555 1500 1500 1500 1500 1500 1500 1500 2000 2000 20003000 3000 1500 1500 1500 1500 1500 1500 1500 2000 2000 2000* (± 10 mm)Tolerances to HOBAS Product CertificatesAll figures quoted are values and may vary slightly from the finished product due to manufacturing tolerances. The information and recommendations reflect the state of our knowledge at the time ofpublication. They cannot therefore be construed as an express or implied warranty. The details must be checked and, if necessary, agreed in each individual case. HOBAS cannot accept any liability. Thisalso applies to errors, omissions and changes to technical data without notice.