Lighting Product

REGDConstant CurrentRegulators-DryCompliances: FAA AC 150/5345-10: L-828 and L-829ICAO Aerodrome Design Manual, Part 5USN NAVAIR 51-50AAA-2Large/11-30kW UnitAIRPORT LIGHTING PRODUCTSREGDApplicationsThe REGD Constant CurrentRegulator is designed to provideprecision control of runway lightingcircuits. The equipment can besupplied with a wide range of controland monitoring options.These regulators are air cooled anddesigned for indoor service.Features• ETL Certified• Air cooled• Advanced Diagnostic Aids• Shunt type ferro-resonant regulator• Elapsed Time Indicator:each step and total• Built-in digital ammeter(0.5% accuracy)• Regulation ±1% over 0 to 100% loadand +10% to -5% line voltagewith no tap changes• On-off switching under load• Lightning and transient protection:input and output lines• Efficiency — 90% minimum• High power factor• Remote reset capability• Output current maintained with30% open isolation transformersecondaries• Open circuit protection• Over current protection• Compatibility of Multiple Options• Soft On/Off• Integral L-829 Monitoring• 10,000 feet remote control @ 120V• Temperature –40°C to +55°C• Plug-in printed circuit boards• Circuit board compatibilitywith small dry CCR***Ordering InformationFixtureType:828 = L-828829 = L-829Frequency:50 = 50 Hz60 = 60 HzD = Dry Type: Air CooledKilowatt Rating:11 = 10 kW 20 = 20 kW15 = 15 kW 30 = 30 kWInput Voltage:*1 = 208 5 = 380 8 = 4802 = 220 6 = 400 9 = 2400**3 = 230 7 = 4154 = 240Output Current:66 = 6.6A20 = 20A (10 kw available in 6.6 Amps only)Output Brightness Steps:01 = Fixed: Full Brightness at 6.6A03 = 3 Steps05 = 5 Steps_D__ _ _ _Options: See catalog page 4.18 for a complete list of options.* Voltage Availability50 Hz only: 230, 380, 400, 415 60 Hz only: 480, 2400 50 or 60 Hz: 208, 220, 240** Wye system is standard with one-pole breaker. For Delta System see Option 94.*** Field adjustments may be required.4.16www.chalp.com