Photometric Data20ELEVATION vs EFFECTIVE INTENSITYL-802A/S, 1000W, 2 LENS BEACON, WHITE LENSELEVATION vs EFFECTIVE INTENSITYL-802A/S, 1000W, 2 LENS BEACON, WHITE LENS1,000 CDELEVATION ELEVATION (DEGREES) (DEGREES)2016161212884401,000 CD5,000 CD5,000 CDREQUIREDREQUIRED37,500 CD37,500 CD37,500 CDTYPICALTYPICAL75,000 CD75,000 CDELEVATION ELEVATION (DEGREES) (DEGREES)02020161612128844000 20 40 60 80EFFECTIVE INTENSITY (CANDELAS X1000)0 20 40 60 80EFFECTIVE ELEVATION INTENSITY vs EFFECTIVE (CANDELAS INTENSITY X1000)L-801H, 400W, 3 LENS BEACON, WHITE LENSELEVATION vs EFFECTIVE INTENSITYL-801H, 400W, 3 LENS BEACON, WHITE LENS1,000 CD1,000 CD5,000 CD5,000 CD12,500 CD25,000 CD12,500 CD12,500 CD12,500 CD25,000 CD37,500 CDREQUIREDREQUIRED0 20 40 60 80EFFECTIVE INTENSITY (CANDELAS X1000)0 20 40 60 80EFFECTIVE INTENSITY (CANDELAS X1000)PHOTOMETRIC DATAPHOTOMETRIC DATATYPICALTYPICALNotes:1. Beacon Rotates:– 12 RPM @ 60Hz– 10 RPM @ 50Hz2. Flash Rate: (L-801H)– 36 Flashes/min @ 60Hz– 30 Flashes/min @ 50Hz3. Flash Rate: (L-802 A/S)- 24 Flashes/min @ 60Hz- 20 Flashes/min @ 50HzApproach & Navigational AidsCrouse-HindsRevised - 10/08Home Office: United States – 860-683-4300International Offices: Canada • China • Dubai • Mexico • Shanghai 3.11
EALElevatedApproach LightAIRPORT LIGHTING PRODUCTSCompliances:FAA Specification FAA-E-982*ICAO Annex 14Transport Canada Specification K-302EAL(98240-G-300-Unit Shown)ApplicationsThe EAL is a unidirectional elevatedlight which may be used as a clearor red approach light, a red end ofrunway light, and a green thresholdlight. For more information, refer tothe Application/Fixture SelectionTable on page 3.14.Features• Meets FAA photometric requirements,using standard PAR 56 lamps, asspecified in FAA-E-982 document.• Suitable for replacement of MB-2MILSPEC MIL-L-26990 lights perU.S. Air Force AFR 88-14.• Easy to install - mounts on a standard2” EMT (50mm pipe) and a frangiblecoupling or approach mast mounted.• Sturdy filter clips - resist high windsand jet blasts.• Cast aluminum housing.• Easy to relamp -special tools are not required.• Easy to aim - uses precise aimingdevice** with digital readout.• Shipped fully assembled.Ordering InformationHow to Order: To the basic catalognumber, add the symbols for Color,Lamp type, Cable Assembly andOptions (if any). A frangible couplingmay be required for proper mountingand must be ordered separately.9 8 2 4 0Fixture Type:Light Color:C = Clear (No Filter or Clips)R = Red, Absorption Filter with ClipsG = Green, Absorption Filter with ClipsDR = Red, Dichroic Filter with ClipsDG = Green, Dichroic Filter with ClipsLamp Type:200 = 200 Watts, 6.6 Amp, PAR-56300 = 300 Watts, 20 Amp, PAR-56No symbol means no lamp is includedExamples:98240-C-200 is a clear approach lightwith a 200 watt lamp, less cable.98240-G-300-20 is a green thresholdlight with a 300 watt lamp and6.5’ (2m) long 20 amp cable.Cable Assembly:66 = 6.5 Feet (2 meters) Long Cable, 6.6 Amp Rated with L-823 Plug20 = 6.5 Feet (2 meters) Long Cable, 20 Amp Rated, with L-823 PlugNo symbol means a cable is not includedOptions:10 = Mounting Kit (consist of 61062-1 Frangible Coupling and25003 Cable Clamp Assembly).11 = Ground Wire* With Exception of the Weight.** Order 50133 aiming device separately (one per facility).3.12www.chalp.com