06.08.2015 Views

Lighting Product

2009_CHALP_Catalog PDF - Acasa | Intec Automatizari

2009_CHALP_Catalog PDF - Acasa | Intec Automatizari

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

PRO III TCL1Taxiway Centerline Light -Single LampCompliances:FAA AC 150/5345-46: L-852 A, and CICAO Annex 14: Fig. A2-13 & A2-15UFC 3-535-01AIRPORT LIGHTING PRODUCTSTCL1ApplicationsThe TCL1 is a taxiway centerline lightthat is used primarily as a groundtraffic aid during periods of lowvisibility to guide aircraft between therunway and the parking stand. TheTCL1 is a single 45W lamp fixture thatsupplies the same performance asour standard Pro III Fixture. It is notavailable with a blank side(i.e. GX or YX)Features• ETL Certified• Low profile, < .25” (6 mm) –FAA Style 3• Unique combination of high-strengthaluminum optical assembly andductile iron outer ring for snowplow protection• Low power consumption• Few parts to stock• Easy to maintain –no sealant required for prismor feed-through assembly replacement• Pressure test plug for seal integrityverificationOutline DrawingOrdering Information8 5 2 5Fixture Type:A = L-852A (Narrow, Cat. II)C = L-852C (Narrow, Cat. III)Color Filters:YY = Yellow/YellowGY = Green/YellowGG = Green/GreenFixture Diameter:12F = Optical assembly with 12” FAA support ringNSR = Optical assembly without support ring– – – P 1L-823 Plug Connection:P1 = One plug (Blank color units will have a threaded cap installed.)Option:G = External gasket between optical assembly and support ring(Note: Optical assemblies with external gasketwill only fit support rings marked “G” on top surface.)LENSLENS BOOT–OPTICAL HOUSINGDimensions:inches(mm)Instruction Manual: 2410Shipping Weight:Shipping Volume:21.0 lbs.9.5 kg0.7 cu. ft.0.02 m 3Support RingLampReflectorO-RINGInner Cover1.32www.chalp.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!