Lighting Product

TRMTaxiway ReflectiveMarkerAIRPORT LIGHTING PRODUCTSCompliances: FAA AC 150/5345-39: L-853NASAO GuidelinesTRMApplicationsTRM tubular retroreflective markersare used to mark the edges oftaxiways and ramps at airportsand heliports. They are particularlyuseful for taxiways with centerlinelights that do not have edgelights. For all airports, TRM markersprovide daytime delineation of theoperational areas. Therefore, theyare often used to supplement edgelighting systems. All TRM markersfeature a white tubular post and a14” reflective material height.Features• FAA approved*• InexpensiveLow initial cost, easy to install,no wiring, requires no power andpractically maintenance free.• DurableBoth the post and the reflectors remainflexible at temperature extremes.• Highly VisibleBrilliant post colors provide 360 degreedaytime visibility, high intensityreflectors provide 360 degree nighttimevisibility.• SafeNo damage to aircraft or vehicles ifstruck.Ordering InformationHow to Order: Reflective material onpost is based on the intended airportlocation as indicated below. Selectpost height and mounting style asrequired.Fixture Type:*Post Height:18, 24, or 30 inchesS H 6 – – – – 1 4Mounting Style:SMA = Surface Mount, Pin Lock BaseSMT = Surface Mount, Twist Lock BaseGP1 = Concrete Open End Anchor - 8 inchesGP3 = Soil Closed End Anchor - 18 inchesGP4 = Soil Open End Anchor - 18 inchesPost/Reflector Colors:WB = Taxiway Edge MarkerWhite Post/Blue ReflectiveWS = Runway Edge MarkerWhite Post/Silver(White) ReflectiveWR = Runway End MarkerWhite Post/Red ReflectiveWG = Runway Threshold MarkerWhite Post/Green ReflectiveReflective Material Height:14 = 14” descending from top of post* TRM Markers are FAA approved by manufacturer Safe-Hit Corporation.6.8www.chalp.com