REAL TIME DVR

DVR User ManualStamp:This provides an option to enable or disable the Camera Name andthe Time stamp on the video. You can also choose a position for the stampon the screen.Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-14:Step2: Checkmark camera name and time stamp; click Setting button. Usercan use cursor to drag the camera name and time stamp at randompositions. Refer to below Figures:Step3: Select “All” to setup all channels with the same parameters.Fig 4-14 Record Configuration-StampBefore DragAfter Drag4.3.5 Recycle RecordThis option is used to recycle the HDD space once it is full. If enabled, the system will automatically delete the old records(FIFO, recycling space) and recycle the space if it is completely utilized. The setting steps are as follows:Step1: Enter into MenuSetupRecordRecycle Record tab.Step2: Checkmark the ‘recycle record’ box to activate the auto recycling.Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current interface.Note: If the option is disabled or not selected, the DVR would stop recording once the HDD is full.25