Planetary Gear Drive
Seisa Compower DP1000 Series Catalog - Sumitomo Drive ...
Seisa Compower DP1000 Series Catalog - Sumitomo Drive ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
■ C <strong>Drive</strong> Unit<br />
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●<br />
■<strong>Drive</strong> Unit Standard Specifications<br />
Motor<br />
Item Standard Specification Standard Specification with Built-in Brake<br />
Capacity<br />
Range<br />
0.2kW×4P~55kW×4P<br />
0.2kWX4P~30kWX4PFB Brake (Non Asbestos)<br />
37kWX4P ESB Brake<br />
Enclosure Totally enclosed fan cooled type Totally enclosed fan cooled type<br />
Power Source 55kW and smaller 200V 50/60Hz、220V 60Hz 37kW and smaller 200V 50/60Hz、220V 60Hz<br />
Insulation<br />
Insulation<br />
Pole<br />
4P<br />
Insulation<br />
Class E 0.2~0.4kW Class E 0.2~0.4kW<br />
Class B 0.75~22kW Class B 0.75~22kW<br />
Class F 30~55kW Class F 30~55kW<br />
Time Rating Continuous rating Continuous rating<br />
Pole<br />
Pole<br />
4P<br />
Lead wiring<br />
Lead wiring<br />
Lead<br />
0.2~7.5kW<br />
Wiring<br />
3<br />
5<br />
(Direct starting)<br />
(Lug<br />
Type)<br />
Standard<br />
Note 1: -Δstart is also available. Please consult us<br />
6<br />
Note1 11~55kW<br />
( -Δstarting<br />
available)<br />
According to JIS<br />
8<br />
Pole<br />
4P<br />
4P<br />
0.2~7.5kW<br />
(Direct starting)<br />
Note1 11~37kW<br />
( -Δstarting<br />
available)<br />
Reducer<br />
Ambient Conditions<br />
Item<br />
Lubrication<br />
Method<br />
Standard Specification<br />
Oil bath lubrication<br />
(Some of the upper bearings are lubricated with grease)<br />
Lubricant Refer to the page E-2<br />
Reduction<br />
<strong>Planetary</strong> <strong>Gear</strong> System of Involutes <strong>Gear</strong><br />
Method<br />
Shaft<br />
Rotation direction of high speed shaft is the same as output shaft.<br />
Direction<br />
Installation<br />
Indoor (Minimal dust and humidity)<br />
Location<br />
Ambient<br />
Temperature -10℃~40℃<br />
Ambient<br />
Humidity<br />
Under 85%<br />
Altitude Under 1,000 meters<br />
Atmosphere Well-ventilated location, free of corrosive gas, explosive gas, vapors and dust.<br />
Horizontal installation<br />
Installation<br />
Refer to the page E-2.<br />
Method of Coupling<br />
Coupling, gears, chain sprocket or belt.<br />
with driven Machine<br />
Surface preparation: Shot blasting after washing before machining.<br />
Inside painting: UNI GROUND PTC primer is sprayed once.<br />
Painting Outside painting: For prime coating, UNI GROUND PTC primer is sprayed once.<br />
For final coating, SUPIKA#3000 is sprayed once.<br />
Painting color: MUNSELL 2.5G 6/3. Refer to the page E-3.<br />
Note1: A heating or cooling system is necessary in case the ambient temperature is lower than -10℃ or higher than +40℃.<br />
C-2
Change language