HARDWARE

More documents

Recommendations

Info

Lifting Collared Eyebolts - AS2317: Unit of Measure - Each Ensure that eyebolts are not screwed into threaded holes of a different size or type of thread. ORDER CODE Metric Nominal Size (mm) Imperial Nominal (in.) WLL Axial (t) Trunion Type Mounting WLL (tonnes) Perpendicular Type Mounting WLL (tonnes) 0º to 30º WLL (tonnes) 31º to 60º WLL (tonnes) 61º to 90º WLL (tonnes) Thread Pitch Net Weight (kg) 164178 M10 3/8” 0.25 0.06 0.12 0.31 0.2 0.12 1.5 0.06 164170 M12 1/2” 0.4 0.1 0.2 0.5 0.32 0.2 1.75 0.15 164172 M16 5/8” 0.8 0.2 0.4 1 0.64 0.4 2 0.28 164184 M20 3/4” 1.6 0.4 0.8 2 1.28 0.8 2.5 0.46 164197 M22 7/8” 2 0.5 1 2.5 1.6 1 2.5 0.85 164185 M24 1” 2.5 0.62 1.25 3.1 2 1.25 3 1.1 164201 M30 1 1/8” 4 1 2 5 3.2 2 3.5 2.1 164302 M36 n/a 6.3 1.57 3.1 7.9 5 3.1 4 3.7 BSW Lifting Collared Eyebolts: Unit of Measure - Each Reduction factor for single eyebolt use 1 0.25 0.25 0.63 0.4 0.25 UNC Thread Lifting Collared Eyebolts: Unit of Measure - Each General Purpose Zinc Eyebolts: Unit of Measure - Each 05 - <strong>HARDWARE</strong> Not approved for lifting applications. ORDER CODE Size (in.) WLL (tonnes) Thread Pitch Net Weight (kg) ORDER CODE Size (in.) WLL (tonnes) Thread Pitch Net Weight (kg) ORDER CODE Size (mm) Thread Pitch Net Weight (kg) 164176 3/8 0.25 16 0.06 164179 1/2 0.4 12 0.14 164180 5/8 0.8 11 0.32 164182 3/4 1.6 10 0.53 164198 7/8 2 9 0.85 164200 1 2.5 8 1.1 Other sizes available. 164177 3/8 0.25 16 0.06 164171 1/2 0.4 13 0.15 164181 5/8 0.8 11 0.28 164183 3/4 1.6 10 0.46 164199 7/8 2 9 0.85 164186 1 2.5 8 1.1 164202 1 1/4 5 7 2.2 164203 1 1/2 7 6 3.7 Other sizes available. 164191 M8 1.25 0.03 164263 M10 1.5 0.06 164193 M12 1.75 0.13 164278 M16 2 0.21 164286 M20 2.5 0.38 164291 M24 3 0.83 WWW.BULLIVANTS.COM 115
RUD Starpoint Eyebolts - Grade 100 - VRS-F: Unit of Measure - Each RUD Eyebolt - Grade 80 - RS: Unit of Measure - Each • Can be used for both axial and angular loading • Metric (coarse) threads • Rated for use in both single-part and multi-part lifts • *Stamped with F2 WLL. 05 - <strong>HARDWARE</strong> • 1 to 32 tonne • Multi-directional threaded design • *Stamped with F2 WLL • Adjusts to direction of pull • Can be used for both axial and angular loading • Unique key design for easy fi tting • Available in metric and UNC thread sizes ORDER CODE WLL F1 (kg) WLL F2 (kg)* D (mm) K (mm) L (mm) RUD Part No. 164234 1000 400 25 47 12 VRS-F-M8 164235 1000 400 25 47 15 VRS-F-M10 164238 2000 750 30 56 18 VRS-F-M12 164243 4000 1500 35 65 24 VRS-F-M16 164245 6000 2300 40 75 30 VRS-F-M20 164247 8000 3200 48 90 36 VRS-F-M24 164396 12000 4500 60 112 45 VRS-F-M30 164397 16000 7000 72 135 54 VRS-F-M36 164398 24000 9000 82 158 63 VRS-F-M42 164266 32000 12000 94 180 72 VRS-F-M48 ORDER CODE WLL F1 (kg) WLL F2 (kg)* C (mm) D (mm) RUD Part No. 164445 400 100 12 25 RS-M6 164255 800 200 12 25 RS-M8 164264 1000 250 15 25 RS-M10 164194 1600 400 18 30 RS-M12 164446 3000 750 21 35 RS-M14 164280 4000 1000 24 35 RS-M16 164287 6000 1500 30 40 RS-M20 164293 8000 2000 36 50 RS-M24 164298 12000 3000 45 60 RS-M30 164303 16000 4000 54 90 RS-M36 164307 24000 6000 63 90 RS-M42 164447 32000 8000 68 90 RS-M48 Eyenuts, Lifting Loops & Concrete Lifting Eyes RUD Weld-On Eye Plates - VRBS: Unit of Measure - Each RUD Starpoint Eyebolt - UNC Imperial Thread - VRS-F: Unit of Measure - Each • Starpoint Eye Bolt with locking component (UNC thread) • 360° rotation • *Stamped with F2 WLL ORDER CODE WLL F1 (kg) WLL F2 (kg)* D (mm) K (mm) L (mm) RUD Part No. 164236 1000 400 25 47 15 VRS-F 3/8” UNC 164239 2000 750 30 56 18 VRS-F 1/2” UNC 165460 4000 1500 35 63 24 VRS-F 5/8” UNC 165461 6000 2300 40 75 30 VRS-F 3/4” UNC 164391 6000 2300 40 75 32 VRS-F 7/8” UNC 165462 8000 3200 48 90 36 VRS-F 1” UNC 164248 12000 4500 60 112 45 VRS-F 1 1/4” UNC 165463 16000 7000 72 135 54 VRS-F 1 1/2” UNC 165464 24000 9000 82 158 63 VRS-F 1 3/4” UNC 165465 32000 12000 94 180 72 VRS-F 2” UNC • Multi-directional loading • Weld-on design • Forged alloy steel load ring • Ring folds fl at ORDER CODE WLL (kg) B (mm) D (mm) • Rated capacity can be increased 100% in specifi c lashing applications 165041 4000 16 48 135 0.8 VRBS - 4 165042 6700 20 60 170 1.8 VRBS - 6.7 165043 10000 22 65 195 2.8 VRBS - 10 165044 16000 30 90 266 6.6 VRBS - 16 165045 30000 42 130 375 19 VRBS - 30 165449 50000 70 250 620 85.0 VRBS - 50 E (mm) Weight (kg) RUD Part No. 116 1300 722 999
Page 1 and 2: OHS520211 FS520785 EMS520269 05 - H
Page 3 and 4: Grade S Tested Galvanised Screw Bow
Page 5 and 6: Galvanised Screw Bow Shackles: Unit
Page 7 and 8: Commercial Grade Shackles Galvanise
Page 9: Gunnebo ROV Shackle No. 860: Unit o
Page 13 and 14: RUD Weld-On Load Rings - Grade 100:
Page 15 and 16: RUD PP-B Bolt-On Swivelling: Unit o
Page 17 and 18: Gunnebo SLP Screw-on Lifting Points
Page 19 and 20: Black Metric Eyenuts: Unit of Measu
Page 21 and 22: 05 - HARDWARE Rigging Screws & Turn
Page 23 and 24: Grade L Turnbuckles - Clevis (Jaw)
Page 25 and 26: Superbuckles - Eye & Eye: Unit of M
Page 27 and 28: Crosby G-416 Open Spelter Sockets:
Page 29 and 30: PWB Forged Closed Swage Wire Rope S
Page 31 and 32: Wire Rope Grips Wire Rope Grips AS2
Page 33 and 34: Ferrules Aluminium Ferrules DIN Gra
Page 35 and 36: NCG Cable Stockings Cable stockings
Page 37 and 38: Heavy Duty Graded Weave (Tubular):
Page 39 and 40: PWB Anchor Single Sheave Blocks - M
Page 41 and 42: Crosby 431 Snatch Blocks: Unit of M

HARDWARE

Create successful ePaper yourself

Delete template?

Save as template?